3 Mar
2015
3 Mar
'15
12:23 p.m.
Does anyone have any scraped out RL drives with brushes they don't need?
I need 4 or so and will pay cash (Paypal) or trade.
Thanks, Paul
3 Mar
3 Mar
12:31 p.m.
Although I haven't yet deemed it scrap, one of my 5 'was-working-fine'
RL02s isn't powering up correctly. Let me know if you find no sources
more appropriate.
On Tue, Mar 3, 2015 at 3:23 PM, Paul Anderson <useddec at gmail.com> wrote:
Does anyone have any scraped out RL drives with
brushes they don't need?
I need 4 or so and will pay cash (Paypal) or trade.
Thanks, Paul
4:12 p.m.
I have a friend working on CNCing new ones out of graphite blocks using the dimensions I
took off a good one. It's all highly experimental right now, but I'll report back
on how it goes.
Christopher Parish
On Tuesday, March 03, 2015 15:32, Jacob Ritorto wrote:
Although I haven't yet deemed it scrap, one of my 5
'was-working-fine'
RL02s isn't powering up correctly. Let me know if you find no sources
more appropriate.
On Tue, Mar 3, 2015 at 3:23 PM, Paul Anderson <useddec at gmail.com> wrote:
> Does anyone have any scraped out RL drives with brushes they don't need?
>
> I need 4 or so and will pay cash (Paypal) or trade.
>
> Thanks, Paul
>
4:56 p.m.
I have a friend with a lathe and that was his thought too. It should work
fine, but he doesn't have CNC.
Do you have a good source for graphite rod? I'm looking for some for
another project.
Thanks, Paul
On Tue, Mar 3, 2015 at 6:12 PM, Christopher Parish <
christopher.parish at parishcomputers.com> wrote:
I have a friend working on CNCing new ones out of
graphite blocks using
the dimensions I took off a good one. It's all highly experimental right
now, but I'll report back on how it goes.
Christopher Parish
On Tuesday, March 03, 2015 15:32, Jacob Ritorto wrote:
Although I haven't yet deemed it scrap, one of
my 5 'was-working-fine'
RL02s isn't powering up correctly. Let me know if you find no sources
more appropriate.
On Tue, Mar 3, 2015 at 3:23 PM, Paul Anderson <useddec at gmail.com> wrote:
> Does anyone have any scraped out RL drives with brushes they don't need?
>
> I need 4 or so and will pay cash (Paypal) or trade.
>
> Thanks, Paul
>
5:24 p.m.
On Mar 3, 2015, at 16:56 , Paul Anderson <useddec
at gmail.com> wrote:
Do you have a good source for graphite rod? I'm looking for some for
another project.
McMaster-Carr carries graphite rod stock.
--
Mark J. Blair, NF6X <nf6x at nf6x.net>
http://www.nf6x.net/
5:29 p.m.
On Mar 3, 2015, at 8:24 PM, Mark J. Blair <nf6x at
nf6x.net> wrote:
So does Enco (use-enco.com), which often is less expensive (but doesn?t have quite the
enormous selection of stuff that McMaster-Carr does). They call it ?EDM Rod? because
these rods are used for the tool bits in electric discharge machines.
paul
On Mar 3, 2015, at 16:56 , Paul Anderson
<useddec at gmail.com> wrote:
Do you have a good source for graphite rod? I'm looking for some for
another project.
McMaster-Carr carries graphite rod stock.
7:54 p.m.
Thanks for the info.
Paul
On Tue, Mar 3, 2015 at 7:29 PM, Paul Koning <paulkoning at comcast.net> wrote:
On Mar 3, 2015, at 8:24 PM, Mark J. Blair
<nf6x at nf6x.net> wrote:
So does Enco (use-enco.com), which often is less expensive (but doesn?t
have quite the enormous selection of stuff that McMaster-Carr does). They
call it ?EDM Rod? because these rods are used for the tool bits in electric
discharge machines.
paul
On Mar 3, 2015, at 16:56 , Paul Anderson
<useddec at gmail.com> wrote:
Do you have a good source for graphite rod? I'm looking for some for
another project.
McMaster-Carr carries graphite rod stock.
3585
days inactive
3586
days old
6 comments
5 participants
participants (5)
-
christopher.parish＠parishcomputers.com -
jacob.ritorto＠gmail.com -
nf6x＠nf6x.net -
paulkoning＠comcast.net -
useddec＠gmail.com