Will any version of A/UX run on a Powerbook 180?

A/UX 3.0 works on the MacII (with PMMU _or_ 68030 upgrade with FDHD ROM's installed), IIx, IIcx, IIci, IIfx, SE/30, IIsi (with 68882 chip) and the Quadra 700|900|950 computers. A/UX 3.0.1 (and later) adds support for the Q800 and Centris Machines (the Centrises _must_ have the real 68040 w/FPU - See Q&A #G.03). A/UX will run on the Quadra 610 and 650s (recall that A/UX requires the _real_ 68040 chip!) with a little bit of work: You should make a copy of the A/UX Install Boot floppy and then copy the Enabler for the Q610|650 onto this copy. You then boot up from this floppy and install A/UX as usual. Finally, you'll need to copy the Q610|650 Enabler onto the A/UX MacPartition (or whatever MacOS disk you will use when starting up your Mac and booting A/UX); do this by first booting off a boot floppy or boot CD and then copy the Enabler over. You do _not_ need to make any changes to the A/UX System Folder (i.e. the System Folder used under A/UX). A/UX will NOT run on the PowerMacs, any AV machines, any PowerBooks (or portables), the LCs, the Duos, the ClassicII, the Q605 or on the Quadra 630... It is recommended that you NOT run A/UX 3.1.1 on the II, IIx, IIcx or SE/30 machines, since their MacOS-compatibility is unreliable under 3.1.1.