15 Dec
2019
15 Dec
'19
7:31 p.m.
Hello,
well maybe my memory has blank spots.
I have two CDC Lark Disk modules I would like to revive, they are in good
shape, but only one has a cartridge included, and they are not identical.
Not sure if the other one could be employed without cartridge.
I never found a manual with exact model correspondence, I found years ago a
manual for very similar drives.
IIRC there was a sort of adapter board between SMD and (xxx blank spot)
interface. There was a description of the interface, it was really similar
to SMD, but wasn't SMD...
Maybe I should check again the Lark model number.
Andrea
15 Dec
15 Dec
8:47 p.m.
Oddly enough I have a 9457 Lark out in the shed. The trick is the SMD to
whatever it is connection is made in the power supply box, there is a
ribbon cable going from the box to up to two drives and an SMD interface
on the other side. Do you have the power supply?
C
On 12/15/2019 2:31 PM, shadoooo via cctalk wrote:
Hello,
well maybe my memory has blank spots.
I have two CDC Lark Disk modules I would like to revive, they are in good
shape, but only one has a cartridge included, and they are not identical.
Not sure if the other one could be employed without cartridge.
I never found a manual with exact model correspondence, I found years ago a
manual for very similar drives.
IIRC there was a sort of adapter board between SMD and (xxx blank spot)
interface. There was a description of the interface, it was really similar
to SMD, but wasn't SMD...
Maybe I should check again the Lark model number.
Andrea
16 Dec
16 Dec
5:41 a.m.
I could probably lend it out, as I have a hacked copy of RSX11M on it.
First I have to find the controller/power supply. Will check around next
time I'm up in the attic.
C
On 12/15/2019 4:57 PM, Al Kossow via cctalk wrote:
On 12/15/19 12:47 PM, Chris Zach via cctalk wrote:
Oddly enough I have a 9457 Lark out in the shed.
I've been looking for one for a while to try to recover an early Sun Unix
if you don't have a need for it.
15 Dec
15 Dec
11:41 p.m.
On Sun, Dec 15, 2019 at 12:31 PM shadoooo via cctalk <cctalk at classiccmp.org wrote:
The ones I've seen were 9457, but there was also a 9455 which had a wider
track pitch resulting in it having roughly 1/3 the tracks and 1/3 the
capacity of the 9457.
I have two CDC Lark Disk modules I would like to
revive, they are in good
[...]
IIRC there was a sort of adapter board between SMD and
(xxx blank spot)
interface. There was a description of the interface, it was really similar
to SMD, but wasn't SMD...
LDI, Lark Device Interface. Not really all that similar to SMD. CDC offered
an SMD-to-LDI adapter.
Maybe I should check again the Lark model number.
1617
days inactive
1618
days old
4 comments
4 participants
participants (4)
-
aek＠bitsavers.org -
cz＠alembic.crystel.com -
shadoooo＠gmail.com -
spacewar＠gmail.com