30 Dec
2000
30 Dec
'00
2:06 p.m.
From: pete(a)dunnington.u-net.com (Pete Turnbull)
That wasn't what I meant. Berg label the connector
pins starting from the
opposite end of the connector from the rest of the world, so what I meant
was that on actual connectors, the pins are:
...
Thanks, I have updated the document. I had less trouble building it in the
first place than figuring out what I built. The adapter has a normal
3M in it and I had though I got the pin 1 backward on it. Apparently
when I built it I knew they were opposite but since forgot.
31 Dec
31 Dec
2:16 a.m.
New subject: BSD, TCP/IP, routing help needed
From the other messgages you can guess this has to do
with PPP and my
Atari ST.
The Atari is running MiNT which is a BSD variant. The machine has no MMU
so no virtual memory and has no mathco, just the ol' 68000.
I've got it dialing in via PPPD to my PC running Warp and a PPP server.
No problems, can ping outside the intranet, name services, local servers
like ftpd etcetera all work:
on the pc:
Eth0 - 24.15.74.214 - connected to cable modem
Eth1 - 192.168.0.33 - Default router for intranet (NAT IP spoofing).
Modem - PPP Server
On the Atari st:
PPP connection to PC (fixed ip of 192.168.0.31) gets me internet access
just as expected BUT I can't ping or otherwise access machines on my
network other than the router (eth1) and (eth0). Why? It is acting as
though I am on a different network on the far side of the router. The St's
default router when connected is 192.168.0.33. 24.15.74.214 works too and
the problem is unchanged.
Arghh.
Regards,
Jeff
--
-----------------------------------------------------------
Jeffrey S. Worley
President
Complete Computer Services, Inc.
30 Greenwood Rd.
Asheville, NC 28803
828-277-5959
Visit our website at HTTP://www.Real-Techs.com
THETechnoid(a)home.com
-----------------------------------------------------------
6:10 a.m.
New subject: BSD, TCP/IP, routing help needed
THETechnoid(a)home.com wrote:
OK, routing is working I would bet that you can ping the ip address of
@Home's router. If that is the case then I expect that you don't have
the resolver portion of the IP setup working.
--
Linux Home Automation Neil Cherry ncherry(a)home.net
http://members.home.net/ncherry (Text only)
http://meltingpot.fortunecity.com/lightsey/52 (Graphics)
http://linuxha.sourceforge.net/ (SourceForge)
From the other messgages you can guess this has to
do with PPP and my
Atari ST.
The Atari is running MiNT which is a BSD variant. The machine has no MMU
so no virtual memory and has no mathco, just the ol' 68000.
I've got it dialing in via PPPD to my PC running Warp and a PPP server.
No problems, can ping outside the intranet, name services, local servers
like ftpd etcetera all work:
on the pc:
Eth0 - 24.15.74.214 - connected to cable modem
Eth1 - 192.168.0.33 - Default router for intranet (NAT IP spoofing).
Modem - PPP Server
On the Atari st:
PPP connection to PC (fixed ip of 192.168.0.31) gets me internet access
just as expected BUT I can't ping or otherwise access machines on my
network other than the router (eth1) and (eth0). Why? It is acting as
though I am on a different network on the far side of the router. The St's
default router when connected is 192.168.0.33. 24.15.74.214 works too and
the problem is unchanged.
8540
days inactive
8541
days old
2 comments
3 participants
participants (3)
-
djg＠drs-esg.com -
ncherry＠home.net -
THETechnoid＠home.com