31 Mar
2015
31 Mar
'15
1:39 p.m.
On Mar 31, 2015, at 4:00 PM, John Foust <jfoust at
threedee.com> wrote:
At 01:14 PM 3/30/2015, Paul Koning wrote:
Tape? Not that I know of. In principle iSCSI can handle tape, but I don?t know if it?s
been done at all, never mind in Linux.
paul
I think iSCSI target support is now a standard
Linux iSCSI feature. If not standard, at least reasonably mainstream. I haven???t tried
it, but I see plenty of references to it on the Linux iSCSI mailing list.
Are they running old tape devices on it? 
31 Mar
31 Mar
1:49 p.m.
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Paul
Koning
Sent: 31 March 2015 21:40
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: USB --> SCSI
How would you connect old tapes to iSCSI? There are modern tapes with Fibre SCSI
interfaces but would you actually connect the thing up....
Dave
On Mar 31, 2015, at 4:00 PM, John Foust
<jfoust at threedee.com> wrote:
At 01:14 PM 3/30/2015, Paul Koning wrote:
> I think iSCSI target support is now a standard Linux iSCSI feature. If not
standard, at least reasonably mainstream. I haven???t tried it, but I see
plenty of references to it on the Linux iSCSI mailing list.
Are they running old tape devices on it?
Tape? Not that I know of. In principle iSCSI can handle tape, but I don?t
know if it?s been done at all, never mind in Linux.
paul
3:34 p.m.
On Mar 31, 2015, at 4:49 PM, Dave G4UGM <dave.g4ugm
at gmail.com> wrote:
If you have an iSCSI target on an OS that takes the SCSI commands and converts them to
device I/O calls for that OS, it ?should? just work. That?s no different from a storage
device that speaks iSCSI out the front and has ATA (or SATA) disks.
paul
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Paul
Koning
Sent: 31 March 2015 21:40
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: USB --> SCSI
How would you connect old tapes to iSCSI? There are modern tapes with Fibre SCSI
interfaces but would you actually connect the thing up....
Dave On Mar 31, 2015, at 4:00 PM, John Foust
<jfoust at threedee.com> wrote:
At 01:14 PM 3/30/2015, Paul Koning wrote:
> I think iSCSI target support is now a standard Linux iSCSI feature. If not
standard, at least reasonably mainstream. I haven???t tried it, but I see
plenty of references to it on the Linux iSCSI mailing list.
Are they running old tape devices on it?
Tape? Not that I know of. In principle iSCSI can handle tape, but I don?t
know if it?s been done at all, never mind in Linux.
paul
3337
days inactive
3337
days old
2 comments
2 participants
participants (2)
-
dave.g4ugm＠gmail.com -
paulkoning＠comcast.net