does it test 4004? and 8008? In a message dated 2/7/2022 6:32:24 PM US Mountain Standard Time, cctalk at classiccmp.org writes:? You may recall that, a few weeks ago, I requested parts help (shoppingbaskets) for?the Retro Chip Tester Pro that I got for Christmas.? Well, today's mailbrought the last?few parts and I have finished and tested it.? Wow!? The only thing that itdoesn't do is?slice bread.? It's great.? I've put up a few pictures here:???http://wsudbrink.dyndns.org:8080/images/RCTPro/???I got the 4008 and 1702 adapters with it, but I'm pretty sure that I willget the rest over?the next month or so.? This is the latest HW version with the latest releasesoftware.???Bill S.???PS: Thanks to everyone that helped with parts.???-- This email has been checked for viruses by Avast antivirus software.https://www.avast.com/antivirus

I hope you are not thinking it would test an Intel 4004 or a 8008? That would be a stretch. For the 4004, there is only a narrow range of frequencies it runs under. I'm not that familiar with the 8008 but suspect it has similar restrictions. Both use dynamic registers. Both use PMOS voltage levels( 15V ). A 4008 RAM chip is not the same as an intel 4008 chip. It is conceivable to use a logic tester to test a i4004 but it would be a lot of effort. Each instruction does unique operations inside of the i4004. One would have to have 256^2 inputs to fully test a i4004 from the pins. Even then there are a similar number of replies that would have to be checked. One could at best have a simple confidence test that it appeared to be working, as most failures of IC cause complete failure of the chip. Even Intel never fully tested parts going out the door. Even for a processor as simple as the 4004, a complete test is not practical. There are not test circuits built into it either. Erturk Kolcalar makes a retro processor exerciser. It basically runs through a USB port from a PC. In its current form, it can't fully test a i4004 because it doesn't meet the proper frequency ( some will work but others won't, but still be functional i4004s ). It runs code loaded from the PC. He currently has the code for the Busicom calculator running. I don't recall if he has one for the 8008? Dwight ________________________________ From: cctalk <cctalk-bounces at classiccmp.org> on behalf of ED SHARPE via cctalk <cctalk at classiccmp.org> Sent: Monday, February 7, 2022 5:44 PM To: cctalk at classiccmp.org <cctalk at classiccmp.org>; cctalk at classiccmp.org <cctalk at classiccmp.org> Subject: Re: Retro Chip Tester Pro, done! does it test 4004 and 8008 In a message dated 2/7/2022 6:32:24 PM US Mountain Standard Time, cctalk at classiccmp.org writes: You may recall that, a few weeks ago, I requested parts help (shoppingbaskets) for the Retro Chip Tester Pro that I got for Christmas. Well, today's mailbrought the last few parts and I have finished and tested it. Wow! The only thing that itdoesn't do is slice bread. It's great. I've put up a few pictures here: http://wsudbrink.dyndns.org:8080/images/RCTPro/ I got the 4008 and 1702 adapters with it, but I'm pretty sure that I willget the rest over the next month or so. This is the latest HW version with the latest releasesoftware. Bill S. PS: Thanks to everyone that helped with parts. -- This email has been checked for viruses by Avast antivirus software.https://www.avast.com/antivirus

On Mon, Feb 7, 2022 at 8:32 PM William Sudbrink via cctalk <cctalk at classiccmp.org> wrote: Cool. Good to see it. I have a board I need to populate myself (mostly I need the MOSFETs) -ethan