Cool, what is required for that setup? /P On Sun, Jun 26, 2016 at 07:51:51PM +0100, Rob Jarratt wrote:

On Sun, Jun 26, 2016 at 11:51 AM, Rob Jarratt <robert.jarratt at ntlworld.com> wrote: Somewhat on the subject, anyone in the US have any BCC03-6 cables in decent condition that they don't need? Looking for one to used for hooking up a VR241. The only ones I've seen on eBay recently are these, which look like they might have some unpleasant corrosion: http://www.ebay.com/itm/370986547444

On Jun 27, 2016, at 4:23 PM, Rob Jarratt <robert.jarratt at ntlworld.com> wrote: Rob, Here is a repeat of a somewhat old post from this mailing list. I think applicable here, though. Hope this is useful. Not my work, I use my Rainbow with one monitor at a time, but this is on my to-do list at some point. Thanks to Tony Duell for the original. ----__ListProc__NextPart____CLASSICCMP__digest_971 Date: Wed, 1 Dec 1999 22:29:53 +0000 (GMT) From: ard at p850ug1.demon.co.uk (Tony Duell) To: classiccmp at u.washington.edu Subject: Rainbow Monitor Cable Message-ID: <m11tIG5-000IyPC at p850ug1> Content-Type: text I seem to remember some old posts here about using 2 monitors with the DEC Rainbow, or using a non-standard monitor, etc. I've just made up a cable which seems to allow just about every possible combination -- I'll stick the wiring diagrams and instructions at the end of this message. I've not tested it fully yet, but it certainly seems to work for all the combinations that I've tried. -tony A universal DEC Rainbow video cable ----------------------------------- This cable allows almost all possible monitor combinations to be used with the Rainbow (see below). Connections : ------------- Rainbow end (DA15-S) 1 >----------+---------+-- Blue Gnd 9 >-------O---------O-- Blue 2 >----------+---------+-- Green Gnd 10 >-------O---------O-- Green 3 >----------+---------+-- Red Gnd 11 >-------O---------O-- Red 4 >----------+---------+-- Mono Gnd 12 >-------O---------O-- Mono 5 >----+ 13 >-+ +------------ Power Gnd 6 >----------+------------ Key Gnd 14 >-------------------- From Key 7 >----------------------- Power 12V 15 >-------------------- To Key 8 >----------------------- Key 12V Box-mounted connectors : VR201 (DA15-P) 1 o 9 o 2 o 10 o 3 o 11 o 4 o-----------+--------+--- Mono Gnd 12 o--------O--------O--- Mono 5 o-------+---------------- Power Gnd 13 o | 6 o-------+---------------- Key Gnd 14 o--------------------- From Key 7 o------------------------ Power 12V 15 o--------------------- To Key 8 o------------------------ Key 12V Monitor BNCs : Red ( o )--------- Red Gnd | +----------- Red Green ( o )--------- Green Gnd | +----------- Green Blue ( o )--------- Blue Gnd | +----------- Blue Mono ( o )--------- Mono Gnd | +----------- Mono LK201 keyboard (RJ11-- front face view) ------- | | ----- ----- | | | | | | -- ^ ^ ^ ^-- | | | | From Key -----+ | | +----- To Key Key 12V----------+ +-------- Key Gnd Components : ------------ DA15S socket + hood (to fit Rainbow video connector) DA15P plug + jackposts (for VR201 connection) 4 off 75 Ohm BNC sockets (for monitor connections). You could use other connectors, like RCA phono, but BNC are standard. RJ11 socket, chassis mounting (for LK201 keyboard). Chassis mounting sockets of this type are very hard to find. I ended up making a bracket to clamp a PCB-mounting one to the panel Metal box of a suitable size to hold the above connectors (apart from the DA15S). 1m cable. At least 4 75 Ohm screened cores and 6 single wires. I used a 'unversal SCART cable' which has 6 75 ohm screened cores (I simply ignored 2 of them), a 4 way screened cable (I used this for the 4 keyboard connections) and 4 other wires (2 in parallel for each of Power 12V and Power Gnd). Possible monitor combinations : ------------------------------- 1) VR201 only This is pretty useless, but you can connect a VR201 mono monitor using the DEC lead to the DA15P on the box. Connect the LK201 keyboard to either the VR201 or the RJ11 on the box. 2) Standard composite mono monitor Connect monitor input to 'mono' BNC on the box. Connect LK201 to the RJ11 on the box. This works just like a VR201, but you can use any monitor 3) VR201 and separate mono graphics monitor Connect VR201 to DA15P. Connect LK201to either RJ11 on the box or to VR201. Connect second (composite) monitor to the 'green' BNC. You can use the dual monitor driver for GSX and have text on the VR201 and graphics on the second monitor 4) Two composite mono monitors Connect one to 'mono' BNC, other to 'green' BNC. Connect LK201 to RJ11 on box. Using the dual monitor driver, you get text on the first monitor and graphics on the second monitor 5) RGB (sync-on-green) colour monitor (e.g. VR241) Connect monitor inputs to BNCs as follows : Red - Red Green - Mono Blue - Blue. Connect LK201 to RJ11 on box. This gives the standard DEC color monitor connections giving green text and colour graphics using the colour monitor driver 6) RGB monitor and VR201 Connect VR201 to DA15P on box. Connect LK201 to RJ11 on box. Connect color monitor as follows Red - Red Green - Green Blue - Blue This gives separate text and colour graphics displays when used with the dual monitor driver 7) RGB monitor and composite mono monitor Connect mono monitor input to 'mono' BNC. Connect LK201 to RJ11. Connect colour monitor as follows Red - Red Green - Green Blue - Blue This gives separate text and colour graphics displays when used with the dual monitor driver