This turned up while I was collecting some indicators for a control panel
project.
But this might be something that should not get chopped up, and I'm not
quite sure
what this is (was).
Its a 19 inch wide, rack mount panel with a 36-bit indicator register using
Dialco 507-3917 incandescent lamps (5 are missing). There are also 4 toggle
switches (one dammaged).
The panel itself is .250" thick plate, painted grey with hand-written labels
written
on masking tape.
Behind the panel there are two (DEC) 4918 18-bit Indicator boards with
transistor
drivers and connectors for logic and power. Spade lugs supply the power
while
a single-finger 'unibus-like' female edge connector is used for the logic
signals.
The toggle switches are connected by multi-couductor flat cable (not modern
ribbon cable) to a 3-66 PERFORATED BOARD W994A, which is a single
finger 'unibus-like' male edge card connector.
It gets more interesting when I read the handwritten labels above the
indicators.
From left to right, they read:
A sel
B sel
Restart
IOT GO
PA PIR 1 thru 7
PB PIR 1 thru 7
P0
P1
RD RQ
WR RQ
META STP
META ERR
(blank)
PU 1
P1
(blank)
FLAG
PIA PDP-6 (3 lamps)
10 FLAG
PIA PDP-10 (3 lamps)
I'm guessing this was part of some PDP-10 to PDP-6 interface kludge made
from DEC logic modules. Is this part of some
well-known kludge, it
probably
came from MIT's surplus equipment exchange back in the mid 1980's, but
its clearly much older than that.
Is this something someone wants, or should it be canabilized?
( I gotta Google on a PDP-6, I dunno that one, but I know what a -10 is!)