Hi
I recently aquired a complete PDP-8/e. As it had not run for a
while I took the usual precautions of reforming the electrolytics in the
PSU as well as dismantling the whole system and cleaning everything.
I was rewarded with a working system. I started to run some simple
toggle in programs and got to the stage of driving a VT 320 with a
display of whole the character set at 110baud.
I was about to toggle in the next test which would have been a keyboard
echo routine when I discovered I could no longer load anything into
memory.
Load address works but setting the data to load into memory in the
switch register and raising DEP no longer writes the data to memory.
.
RUN works so it looks like the timing plus the RUN/STOP flipflop are
running ok.
However one shot operations like DEP and EXAM are difficult to diagnose
as is hard to see a one off 500nS pulse.
I don't think its the memory itself ( 4 x 4K of core) as I have tried
each 4K bank on its own with the same result.
I do have the CPU manual and a decent Tektronix scope.
Has anybody any suggestions?
Rod Smallwood
>
>Subject: Loading an OS onto a real PDP-11 - not an emulator
> From: Doug Jackson <doug at stillhq.com>
> Date: Sun, 23 Mar 2008 18:51:02 +1100
> To: cctalk at classiccmp.org
>
>Hi List,
>
>Following the wonderful advice so for, My shiny PDP 11/04 has now been
>upgraded to a 11/34, and I have a temporary terminator pack for my RL01
>disk drive.
>
>I suspect that I have a system that is capable of booting. - Wo Hoo.
>(read - the disks spin, and the fault light stays off.....)
>
>My final problem (Dont hold me to that though) is that I while I have a
>number of disk packs, I don't believe that I have anything to boot!!
>The packs are not really usefully labeled.
>
>Having trawled the list, I can find many many messages about archiving
>data off RL disk packs, and onto archival systems (such as emulators,
>etc) - bit I cant find anything about how to take a disk image, and put
>it onto an real RL01 attached to real PDP11 where there is no other
>media... I suspect that I have to load in a serial receiver program,
>and dump an image - but the details are so far, sparse....
>
>If somebody could provide some pointers - that would be awesome..... In
>an ideal world, I would be able to get RSTS onto this system (I have
>dual RL01's - so that may not work) - Alternately, just being able to
>boot RT11 to load a Forth interpreter would also work. [Yes, this is
>where I admit to being a Forth person - I hope people will still want to
>talk to me having admitted that]
Two ways I know of and they are essentailly the same. Create a pack on a
working system or bring up a pack from a working sytems. Other options
are a floppy based bring up (RT11 fits on floppy) or maybe loading core
via serial line with a bottable image. Last option is emulateted Tu58
where the PC acts as a TU58 with RT11 and you use a serial line to boot
and run fromt hat to create a RL pack. IN any case I don't think anyone
has come up with a way to write a RL from a PC directly. Generally every
one has at least one other media (RX01/2 or RX50 OR TK50, TUxx) for
portability.
It's look at the option where someone creates a pack for you or loans
a pack or the emulated TU58 option.
Allison
>Thanks
>
>Doug
I have the age-old problem of a bunch of RK05 drives with only the
"drive" half of the rack slides, and no "rack" half. Does anyone here
have a stash of RK05 rack slides?
Oh, and the other thing I'm looking for is a half-height (3U, 5.25")
black blank panel, of the type that's often used on the top half of the
front of a 10.5" PDP-11/34 chassis.
I don't have much cash to offer (still trying to recover from a
stretch of unemployment earlier this year) but I have LOTS of DEC stuff
to trade.
Thanks,
-Dave
--
Dave McGuire
Port Charlotte, FL
I made a trip to my (far away) storage locker today, and brought
home a few things that I hope to bring back to life in the coming weeks.
First is an HP9810A. I just powered it up...Several LEDs turn on
immediately, but the display is blank and the keys are unresponsive.
Does anyone (Tony?) have any troubleshooting hints? Are schematics
for this machine floating around anywhere?
The second is a PDP-11/05. It hasn't been powered up in about
twenty years, and has an empty backplane. I'm pretty sure I have all
the right boards, but I'll have to dig through quite a few crates to
locate them. I may do that tomorrow or Friday. Friday is my
birthday (39, *shudder*) and I always make it a point to do things
that I love on my birthday, and hacking on a PDP-11 definitely
qualifies, so I'll probably work on it then.
The first thing that sticks out about the 11/05 is that the
keylock switch has a key broken off in it. At least it's in the
"power" position. Does anyone have a spare key for this machine? If
so, can I talk you out if it? It's not one of the ubiquitous XX2247s
of which I have quite a few; it's a standard "slot" key.
Thanks,
-Dave
--
Dave McGuire
Port Charlotte, FL
> Date: Fri, 21 Mar 2008 17:13:27 -0500
> From: Jim Leonard
> I used a Central Point Option Board on a 386sx-16 and a 386dx-40 so I'd
> say you're safe. -- Jim Leonard (trixter at oldskool.org)
How about the Matchpoint? Anyone?
Cheers,
Chuck
Please respond privately if you don't think a 20-year old topic is
appropriate for the list.
I was wondering if anyone's tried to use a Microsolutions Match Point
and/or a Central Point Deluxe option board on a 386/20. I'll be
using an old Micronics system (no custom VLSI) if that's any help.
I'd like to find out if this works before I get out my screwdriver.
Thanks,
Chuck
Hi list,
I'd like to pick your collective brains, if I may?
I have quite a few books here which, though I'd like to keep the
content, do take up a lot of space*. I'm looking at some kind of
solution for scanning them, and so far "cutting the spines off and
loading the pages into a sheet-fed scanner" seems likely to be fastest
- I can't afford an automatic book scanner, and whilst there are units
like the Mustek OpticBook range, it'd take forever to be there picking
the book up, turning the page and replacing it for each scan.
This is only semi-OT inasmuch as I know various people on the list
need to scan classic-computer-related documentation from time to time,
so this info may be useful to others.
So - does anyone know of a make/model scanner which has a high
(ideally 100 pages or more) sheet-feed capacity, is fast (ideally
SCSI, maybe USB2, Firewire is third choice) and produces good results
for this sort of thing? New or secondhand is fine.
Thanks,
Ed.
* nothing of any historic or cultural significance - mainly just
recipe books. I wouldn't destroy anything rare or important.
> So - does anyone know of a make/model scanner which has a high
> (ideally 100 pages or more) sheet-feed capacity, is fast (ideally
> SCSI, maybe USB2, Firewire is third choice) and produces good results
> for this sort of thing?
There are many. I'm currently using a Kodak 2500D, which can be found used
for a few hundred dollars on eBay.
Hi,
Looking for switch setting info for the serial (multi interface?) board
in a Facit 4070 tape punch. The stencilled on labels are a little
cryptic, and there's no stencil for the big chrome toggle switch on the
back.
Thanks,
De