24 May
2023
24 May
'23
3:18 a.m.
Anybody out here, still in business using them?
Which ones are still easily available?
(I look for something which has 2 UARTs, FDC and IDE?)
Thanks
24 May
24 May
5 a.m.
The C256Foenix FMX uses a SuperIO chip: https://wiki.c256foenix.com/index.php?title=ICs
On 24 May 2023, at 12:18, emanuel stiebler via cctalk
<cctalk(a)classiccmp.org> wrote:
Anybody out here, still in business using them?
Which ones are still easily available?
(I look for something which has 2 UARTs, FDC and IDE?)
Thanks
5:24 a.m.
https://www.microchip.com/en-us/products/embedded-controllers-and-super-io
https://www.microchip.com/en-us/parametric-search.html/674
From a QL 0.5 mm pitch QFP will be as good as it gets, and a lot of the parts are NRFND,
EoL, etc
Interesting that these parts continue to exist.
Ano option would be an FPGA, e.g. Artix on a 48 pin DIP module,
https://www.mouser.co.uk/ProductDetail/Digilent/410-328-35
Martin
-----Original Message-----
From: Raymond Wiker via cctalk [mailto:cctalk@classiccmp.org]
Sent: 24 May 2023 13:01
To: cctalk Off-Topic Posts <cctalk(a)classiccmp.org>
Cc: raymond.wiker(a)icloud.com
Subject: [cctalk] Re: Super I/O chips
The C256Foenix FMX uses a SuperIO chip: https://wiki.c256foenix.com/index.php?title=ICs
On 24 May 2023, at 12:18, emanuel stiebler via cctalk
<cctalk(a)classiccmp.org> wrote:
Anybody out here, still in business using them?
Which ones are still easily available?
(I look for something which has 2 UARTs, FDC and IDE?) Thanks
6:37 a.m.
Has anyone ever looked at using the P112 to read and write these classic
format floppies? I understand it can do 8" CPM floppies so that would imply
the controller has all the needed modes.
bill
342
days inactive
342
days old
3 comments
4 participants
participants (4)
-
Bill Gunshannon -
emanuel stiebler -
Martin Bishop -
raymond.wiker＠icloud.com