Hi all,
I have an project building an digital clock using only neon lamps (and
small thyratrons) as active elements in Ring counters and some nixie
tubes for the Display. Only diodes are allowed..
For that project I want to generate the reference clock with an
xtal excited from a neon lamp. I habe an 4kHz crystal with 3 terminals
which isn't ideal for the job. I can excite the xtal with an neon tube,
but the 4kHz is the maximum was seems to be possible (tried several neon
devices, even stabilizer tubes).
After power up the generator wouldn't start up, I have to change an pot
to get it oscillating synchronously .. then it would work for several
hours, and then I have to adjust the bias again.
Because of deionisation times in the neon lamps the 4kHz are'nt comfortable
anymore.
In the meantime I've found an article in an old russian "radio" magazine
which describes exactly what I'm doing.. but they use an 960Hz (!) xtal
there. .. maybe an unobtanium crystal...
So here my question: Has anyone an xtal with an very low frequency laying
around, which frequency can be devided down to 1 Hz (with ring counters,
flipflops etc)? Maybe 1 oder 2Khz? ..or some other frequency that is
"dividable" to 1Hz?
Shouldn't be for nothing and I'm paying for the shipping (to germany).
This is not the last stand, but it can demonstrate what I'm doing:
https://www.tiffe.de/images/uhr2.mp4
Thx in advance,
Holm
--
Technik Service u. Handel Tiffe,
www.tsht.de, Holm Tiffe,
Goethestrasse 15, 09569 Oederan, USt-Id: DE253710583
info(a)tsht.de Tel +49 37292 709778 Mobil: 0172 8790 741