September 2026 - cctalk - classiccmp.org

HP 16500-61607or 16500-61608 80 pin hi density cable needed

by Mike Katz

Does anyone have one (or know where I can get one) of the 80 pin high density cables that connects the 16500B main board to the 16500-68733 (16500L or 16500H) LAN/High Speed interface board. The cable part # is 16500-61607or 16500-61608. Please contact me off list at bitwiz(a)12bitsbest.com Thank you, Mike

12 hours, 7 minutes

2
8
0 0

October CCC Repair and Camaraderie Meeting in Glen Ellyn 17-Oct-26

by Mike Katz

I hope everyone had a good time at VCF Midwest last weekend. The next meeting in Glen Ellyn of the CCC Hardware Repair and Discussion will be held on October 17, 2026. Meeting Starts at 2:00PM and we will order pizza around 6pm or so. I hope to see you there, Mike Katz 385 Saint Charles Rd Glen Ellyn, IL 60137 +1 (773) 414-1044 (Cell)

2 days, 4 hours

2
1
0 0

Re: VT510

by Aaron Woolfson

Hey, just an FYI, Devin D. <damicomainframe(a)gmail.com> has spoken for this, and I'll be sending to him in Florida. > I have a working VT510 if anyone would like it, I'd like to give it to a > good home. This is the one that uses a PS2 style connector for a > standard AT keyboard to be plugged into, and operates with RS232. I've > just used it as a console on a fun project the last few years on and off. > > Just send me your address, and it's yours , you don't even need to pay > for shipping , as long as it is continental united states. --

2 days, 6 hours

1
0
0 0

VT510

by Aaron Woolfson

I have a working VT510 if anyone would like it, I'd like to give it to a good home. This is the one that uses a PS2 style connector for a standard AT keyboard to be plugged into, and operates with RS232. I've just used it as a console on a fun project the last few years on and off. Just send me your address, and it's yours , you don't even need to pay for shipping , as long as it is continental united states. Aaron

2 days, 6 hours

3
3
0 0

PiDP kits available

by Mike Katz

I have a few PiDP Kits that didn't sell at VCF Midwest. If you would like one, please email me (bitwiz(a)12bitsbest.com). Thanks, Mike

2 days, 15 hours

1
0
0 0

VT100 firmware with Space Invaders in AVO ROM

by Richard

[Please reply to cctalk only] Hello fellow simulator enthusiasts! As a surprise reveal for the end of my "VT100 Deep Dive" talk at VCFMW last weekend, I showed a Space Invaders clone running in the AVO expansion ROM of the VT100 via MAME. Did you know that there's a vt100/vt102 emulator in MAME? It's marked as "not working" and isn't very well documented, but it does in fact work pretty well. In addition to the firmware hack, I've documented how to do various things with the MAME vt100 emulator (see docs/mame.md): - Play back a VT100 animation - Connect to a physical serial port - Connect to a network connection (SIMH console?) Everything is on github in a fork of Paul Williams annotated VT100 firmware assembly listing. <https://github.com/LegalizeAdulthood/vt100-firmware> Please note that if you wish to try this with real ROMs on real hardware that some special considerations will need to be taken. See the documentation for that. -- "The Direct3D Graphics Pipeline" free book <http://tinyurl.com/d3d-pipeline> The Terminals Wiki <http://terminals-wiki.org> The Computer Graphics Museum <http://ComputerGraphicsMuseum.org> Legalize Adulthood! (my blog) <http://LegalizeAdulthood.wordpress.com>

3 days, 1 hour

1
0
0 0

Pristine Archival Find: 1999 Compaq AlphaServer DS10L Virgin "DEC INTERNAL" Factory Boot Image (OpenVMS V7.2)

by Jeffrey S. Worley

I took a chance and bought an Alphastation DS10L recently sold as untested. (1U model). On receipt it boots a virgin VMS 7.2b with everything under the sun installed and licensed to 'dec internal'. If I enter a date later than 2002 or so, the installed software explodes with license expiration. The list of installed features takes forever to list at 9600baud..... I searched the drive for boot logs etc and all are blank. The drive reports zero gigs read and the entire machine is utterly pristine within, dustless. The seller did not install vms on this drive. I checked the date-codes on both drive and machine; they are contempories. I'm very confident that this drive shipped with the machine, and it bears no sign of use. I imaged the drive (for fun with my PA7300lc), so I have a secured copy of the drive with the only difference that it has been booted once or twice, and on the last I changed the SYSTEM password to "slateev6". Is this installation of interest? There's a paper tag on the machine which still reads "TP 14" in ballpoint. Is this possibly an internal machine? There are no asset tags on it. best, jeff (Technoid Mutant)

3 days, 7 hours

1
0
0 0

TCU-50 RSX-11M+ utility

by Peter Ekstrom

Hi all, I have recently gotten my TCU-50 clock board to work in my PDP-11/23+, and needed a utility that made it easier to manage it. So I put together a little Macro11 program to help me. I don't know if anyone else has one of these boards but just in case, I thought I'd share it. I have it in a repository at github: https://github.com/kg4okg/tcuclk/ I am a newbie at Macro11 so don't expect anything fancy. :) - Peter

4 days, 1 hour

2
2
0 0

Introducing... My self

by Demir Duyulur

Hi everyone, I'm Demir. I'm interested in vintage computers, particularly classic Macintosh systems and 1990s PCs. I've recently been getting more into restoring and using old hardware rather than just emulating it. Looking forward to learning from everyone here! Android'de AOL'den gönderildi

1 week, 2 days

1
0
0 0

DEC items available

by Rod Smallwood

Hi Guys My DEC Collection needs downsizing. Im in the UK so for the US only the small stuff would be worth shipping If you need anything PDP8, PDP11 or VAX please indicate item you might want Rod

1 week, 3 days

12
18
0 0

2026

2025

2024

2023

2022

cctalk September 2026