[cctalk] Emulex QD21 controller help

Well, I have gotten the diags to come up, after getting an EPROM dump from Glen Slick.  THANKS, Glen! Now, the problem is to get the NOV RAM configured for these drives. I have two Fujitsu ESDI drives that should have working VMS systems on them.  I first tried coming up with my own drive parameters, that didn't work.  Then, I tried setting the drive to type 2 (get parameters from drive automatically), that didn't work either. The small drive I have has some numbers written down on the bad block list paper, I will try those but it doesn't look like enough numbers. Anyway, the drives I have are: Fujitsu M2246E and Fujitsu M2263E.  The manual does list the parameters for the M2246E, I will have to try those.  But, I have no parameters for the M2263E.  Does anybody know where to get these config parameters for the M2263E?  That is the drive that was used most recently, so I would prefer to get that one running. Thanks much for any help! Jon