13 Sep
2022
13 Sep
'22
1:42 p.m.
On 13/09/2022 20:54, Robert Armstrong via cctalk wrote:
Has anybody found a replacement for them? Does
anybody have any
suggestions?
I had one of these that was not working but in my case it seemed to be
the LED that had failed.
I struggled to find a direct replacement in the correct case so I
repaired the original one. It was not potted inside but just glued
together so fairly easy to get apart. I then replaced the LED, which is
just a through hole part soldered directly to the wires. It's a very
fiddly job but certainly possible.
The only other modification that may be required is to install a larger
value resistor to reduce the current for the new LED.
Matt