On Tue, Nov 17, 2026 at 2:14 PM jdavidson89 via cctalk <
cctalk(a)classiccmp.org> wrote:
I have created the 1BSD installation tape from the
tarball on TUHS, I
placed the tarball onto a SIMH magtape with rawtap, extracted that with tar
in a v7 guest, then using v7 tp made a magtape that is readable and
extractable with tp on unix v6 amoung others the way the instructions from
Bill Joy suggest, the only issue remaining was the cont.a archives only
extract with a v7 or newer ar so I made a DECTape of 2.79BSD ar backported
to v6 by adding the 2 missing functions xtol and mktemps in the ar.c file,
so with the DECTape ar-new.c compiled you can fully extract the 1BSD
magtape in an UNIX v6 or newer, as far as I could tell this hadn't been
done or at least publically shared so I have uploaded the instructions to
gunkies as well as a link to the files I have created.
https://codeberg.org/jdavidson89/1BSD
or
https://github.com/jdavidson89/1BSD
Another way to get a new ar utility that works in v6 is to copy it from the
Usenix 77 tape that TUHS has:
https://www.tuhs.org/Archive/Applications/Usenix_77/
The Usenix 77 tape needs to be converted back to tp format just like the
1BSD tape. Once that's done, here's the procedure to extract the new ar::
Log in as 'bin'. Extract the files from the Usenix 77 tape into your
directory of choice (in this example, /dist/usenix77):
% mkdir /dist/usenix77
% chdir /dist/usenix77
% tp xm setup_1 setup_2 setup_3 setup_h
% sh setup_1
% sh setup_2
% sh setup_3
% mkdir h
% chdir h
% sh ../setup_h
% chdir ..
% tp xm
Extract the new_ar files:
% chdir 1/new_ar
% ../../newarch x cont.a
% rm cont.a
Install the new ar:
% mv /bin/ar /bin/ar.orig
% cp ar /bin
% mv /bin/ld /bin/ld.orig
% cp ld /bin
% chmod 775 /bin/ar /bin/ld
% cp arcv /bin
Convert old archives to the new format:
% chdir /lib
% arcv *.a
% chdir /usr/sys
% arcv lib1 lib2
Once you have the new ar installed it's straightforward to extract files
from the 1BSD tape. But if you want to recompile everything you'll need the
'Typesetter' C compiler. I suspect the easiest way to get it is to copy it
from a running PWB/UNIX system but I haven't actually tried this yet.
-ken