[cctalk] Modern Replacement for H7140 in PDP 11/24

Given all the troubles I have had with the H7140 in my PDP 11/24 I am considering whether to replace it with modern equivalents, installed inside the H7140 enclosure. I am a bit puzzled by the specs listed in the PDP 11/24 Maintenance Card, it suggests the PSU outputs +12V and -12V from the memory inverter/memory regulator, but the specs for the cards don't mention 12V so I don't know if I need 12V from the PSU. My memory board is an M8722-BC (MS11-MB). I can't find a manual or printset for this memory, so I am not sure what voltages it will need, although I suspect it only needs +5V, +15V and -15V. Is that right? I know I will also have to replace the fans, because the ones in the machine are AC and need 35V. Thanks Rob