TerraHertz via cctalk wrote:
i was about to suggest a tuning fork too.
I have a vintage "1KHz frequency reference" that is purely electro-mechanical,
but outputs a decent amplitude signal. The 'gain' to keep the tuning fork
vibrating is provided by small carbon-granules elements similar to early telephone
microphones.
Oh My God....
If you're interested I can take some photos of it tomorrow.
Yes please!
My Problem is, that I not only have to keep the fork or the xtal
oscillating, I must amplify the amplitude so it can reliable trigger an
neon bulb in self extinguishing mode ot a cold cathode thyratron.
The counters I've build are working with the russian TX4b Thyratron that
where used in the USSR in some black&white TV sets for the amplitude
discriminator ..and worked not reliably long enough since they
overloaded it by design :-|
An Seller here in germany sold masses of them for cheap..so I've bought
100 pcs. Later I've discovered that the russians build some Morse code
generator with that thyratrons (which also was'nt reliable). ...but it
had interresting schematics.
So I've build my counters using hints from the schematics from the
"Anita Mark 8" electronic calculator (google for it), from the Morse
code device and reading old books from Ericson (Decatrons) and others.
I know, that's all no problem if you can use Transisttors or thermoionic
tubes..but then the clock is nothing special anymore, it's one of
thousands home build nixie clocks...
Regards,
Holm
--
Technik Service u. Handel Tiffe,
www.tsht.de, Holm Tiffe,
Goethestrasse 15, 09569 Oederan, USt-Id: DE253710583
info(a)tsht.de Tel +49 37292 709778 Mobil: 0172 8790 741