Looking for old OAK keyboard/control switch...

[John Robertson]

Link to image of switch:

https://www.flippers.com/images/Misc/OAK_Pushbutton_Switch-1973.jpg

Thanks,

John :-#)#

On 2022/04/29 2:14 p.m., John Robertson via cctalk wrote:
> I've been hunting for a few years for these switches and was thinking 
> that perhaps folks here may have seen them or even have some they wish 
> to part with...I've hit all the surplus sites, and poured over old 
> copies of old Radio Master Parts Catalogue/Encyclopedias - have 7 of 
> those, from 1971 going back to 1942 (have visited bitsavers too of 
> course)...
>
> This has a total length of 1-5/8", the actuator bar is 5/8 x 3/16 x 
> ~1/32", the body is 1/2 x 1/2 x 7/8". This uses spring steel snap-on 
> clips to secure it in the rectangular hole in the control/keyboard panel.
>
> They have four pins, two are NC and two are NO, no interconnection 
> between the pins.
>
> See attached 15kb photo. Hope this doesn't break the system!
>
> Looking for as many as anyone can spare! These are for restoration 
> work, so the more the merrier.
>
> Thanks!
>
> John :-#)#
>

-- 
                  John's Jukes Ltd.
7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
Call (604)872-5757 (Pinballs, Jukes, Video Games)
                  flippers.com
  "Old pinballers never die, they just flip out"