HP 3000/37 console

[Keven Miller(rtt)]

(Retrying post, with different email.)

As Ed mentioned, I believe the CISC machines will need the ENQ/ACK.
I thought that speed-sense was only on the CR. But the ENQ/ACK will happen
every 80 chars sent.

I think you can wait on it because it will timeout, and continue.
Or when output pauses, you could type Control-F, as I recall.

If you cannot get your hands on Reflection (
 https://www.microfocus.com/products/reflection/ )
(took me a moment to find it, now that microfocus controls it)
or Minisoft Win92/Secure92  (www.minisoft.com),
or an hp terminal, you could try QC-Term.

 http://www.3kranger.com/Atmar/AICS_qcterm.shtm

Keven Miller


> ----- Original Message ----- 
> From: "Mike Loewen via cctalk" <cctalk at classiccmp.org>
> To: <cctalk at classiccmp.org>
> Sent: Mon 07 May 2018 09:36 PM
> Subject: HP 3000/37 console
>
>
>>
>>    Does anyone know if a non-HP terminal will work as the console for a 
>> HP 3000 Series 37?  The power-on self-test uses ENQ/ACK to speed sense, 
>> but the manual also implies that it will sense speed from a <CR>.  On my 
>> 37, the TIC self-test passes up to the point where it talks to the 
>> terminal, but fails to to speed sense.
>>
>>
>> Mike Loewen mloewen at cpumagic.scol.pa.us
>> Old Technology http://q7.neurotica.com/Oldtech/
>>
>