HP 3000/37 console

[Keven Miller(3k)]

Another quick thought,
Putty ( https://www.putty.org/ )
has serial mode, and an AnswerBack for ENQ (Control-E).
You could try using that, although HPterm escape sequences will not work.
Keven Miller


----- Original Message ----- 
From: "Mike Loewen via cctalk" <cctalk at classiccmp.org>
To: <cctalk at classiccmp.org>
Sent: Mon 07 May 2018 09:36 PM
Subject: HP 3000/37 console


>
>    Does anyone know if a non-HP terminal will work as the console for a HP 
> 3000 Series 37?  The power-on self-test uses ENQ/ACK to speed sense, but 
> the manual also implies that it will sense speed from a <CR>.  On my 37, 
> the TIC self-test passes up to the point where it talks to the terminal, 
> but fails to to speed sense.
>
>
> Mike Loewen mloewen at cpumagic.scol.pa.us
> Old Technology http://q7.neurotica.com/Oldtech/
>