HP 3000/37 console

Tue May 8 08:38:54 CDT 2018

(Retrying post with different email)

 Another quick thought,
Putty ( https://www.putty.org/ )
has serial mode, and an AnswerBack for ENQ (Control-E).
You could try using that, although HPterm escape sequences will not work.
Keven Miller

> ----- Original Message ----- 
> From: "Mike Loewen via cctalk" <cctalk at classiccmp.org>
> To: <cctalk at classiccmp.org>
> Sent: Mon 07 May 2018 09:36 PM
> Subject: HP 3000/37 console
>
>
>>
>>    Does anyone know if a non-HP terminal will work as the console for a 
>> HP 3000 Series 37?  The power-on self-test uses ENQ/ACK to speed sense, 
>> but the manual also implies that it will sense speed from a <CR>.  On my 
>> 37, the TIC self-test passes up to the point where it talks to the 
>> terminal, but fails to to speed sense.
>>
>>
>> Mike Loewen mloewen at cpumagic.scol.pa.us
>> Old Technology http://q7.neurotica.com/Oldtech/
>>
> 