12 Jan
2024
12 Jan
'24
6:02 a.m.
Hi there,
I need a power supply for my PDP8F computer.
It is missing.
The PDP8F 19" chassis box came in 3 different depths,
600 mm (PSU front to back)
370 mm (PSU across the back)
300 mm (PSU front to back)
I need the shallow one, the 300 mm PSU front to back.
Do you have one available, or know where I can get one please.
Even if it is dead!
regards
ray
13 Jan
13 Jan
5:21 a.m.
Hi Ray,
Do you just need the regulator? I think the part # is 54-09728 or 54-
09827. I'll try to look it up this weekend.
Paul
On Fri, Jan 12, 2024 at 12:18 AM Raymond Robinson via cctalk <
cctalk(a)classiccmp.org> wrote:
Hi there,
I need a power supply for my PDP8F computer.
It is missing.
The PDP8F 19" chassis box came in 3 different depths,
600 mm (PSU front to back)
370 mm (PSU across the back)
300 mm (PSU front to back)
I need the shallow one, the 300 mm PSU front to back.
Do you have one available, or know where I can get one please.
Even if it is dead!
regards
ray
2:27 p.m.
54-09728. That's burned into my brain.
(Literally dozens of ECOs)
-Rick
On January 13, 2024 12:21:52 AM EST, Paul Anderson via cctalk
<cctalk(a)classiccmp.org> wrote:
Hi Ray,
Do you just need the regulator? I think the part # is 54-09728 or 54-
09827. I'll try to look it up this weekend.
Paul
On Fri, Jan 12, 2024 at 12:18 AM Raymond Robinson via cctalk <
cctalk(a)classiccmp.org> wrote:
> Hi there,
>
> I need a power supply for my PDP8F computer.
> It is missing.
>
> The PDP8F 19" chassis box came in 3 different depths,
> 600 mm (PSU front to back)
> 370 mm (PSU across the back)
> 300 mm (PSU front to back)
>
> I need the shallow one, the 300 mm PSU front to back.
> Do you have one available, or know where I can get one please.
> Even if it is dead!
>
> regards
> ray
>
14 Jan
14 Jan
10:34 a.m.
I have a few left, but not sure where they are. I should have time to dig
later this week.
On Sat, Jan 13, 2024 at 9:27 AM Rick Murphy via cctalk <
cctalk(a)classiccmp.org> wrote:
54-09728. That's burned into my brain.
(Literally dozens of ECOs)
-Rick
On January 13, 2024 12:21:52 AM EST, Paul Anderson via cctalk <
cctalk(a)classiccmp.org> wrote:
Hi Ray,
Do you just need the regulator? I think the part # is 54-09728 or 54-
09827. I'll try to look it up this weekend.
Paul
On Fri, Jan 12, 2024 at 12:18 AM Raymond Robinson via cctalk <
cctalk(a)classiccmp.org> wrote:
> Hi there,
>
> I need a power supply for my PDP8F computer.
> It is missing.
>
> The PDP8F 19" chassis box came in 3 different depths,
> 600 mm (PSU front to back)
> 370 mm (PSU across the back)
> 300 mm (PSU front to back)
>
> I need the shallow one, the 300 mm PSU front to back.
> Do you have one available, or know where I can get one please.
> Even if it is dead!
>
> regards
> ray
>
6 Apr
6 Apr
3:52 p.m.
On 1/12/2024 12:02 AM, Raymond Robinson via cctalk wrote:
Hi there,
I need a power supply for my PDP8F computer.
It is missing.
The PDP8F 19" chassis box came in 3 different depths,
600 mm (PSU front to back)
370 mm (PSU across the back)
300 mm (PSU front to back)
I need the shallow one, the 300 mm PSU front to back.
Do you have one available, or know where I can get one please.
Even if it is dead!
regards
ray
Did you ever find one? If not, let me know - I *may* have one.
(Madison, WI, US)
JRJ
229
days inactive
314
days old
4 comments
4 participants
participants (4)
-
Jay Jaeger -
Paul Anderson -
Rick Murphy -
robinson＠tuberadio.com