3 Dec
2023
3 Dec
'23
noon
Do any of you three or four TD700 owners out there need any parts? I'm
about to scrap a couple (in the Toronto area).
m
3 Dec
3 Dec
12:08 p.m.
Why are you scrapping them?
Are they generally complete?
If there is enough to refurb into a unit I am interested. I'm in Sequim,
WA.
Thanks
Chris
On Sun, Dec 3, 2023 at 12:01 PM Mike Stein via cctalk <cctalk(a)classiccmp.org>
wrote:
Do any of you three or four TD700 owners out there
need any parts? I'm
about to scrap a couple (in the Toronto area).
m
12:13 p.m.
Oof, those are pretty.
--
Anders Nelson
www.andersknelson.com
On Sun, Dec 3, 2023 at 3:09 PM Chris Coley via cctalk <cctalk(a)classiccmp.org>
wrote:
Why are you scrapping them?
Are they generally complete?
If there is enough to refurb into a unit I am interested. I'm in Sequim,
WA.
Thanks
Chris
On Sun, Dec 3, 2023 at 12:01 PM Mike Stein via cctalk <
cctalk(a)classiccmp.org>
wrote:
Do any of you three or four TD700 owners out
there need any parts? I'm
about to scrap a couple (in the Toronto area).
m
1:36 p.m.
I doubt it, Chris, but you never know; apparently there is someone out
there more or less building one from scratch.
I'm not even sure if I still have the display panel (or if it works).
I sold and gave away some parts three or four years ago, including the
technical manual with schematics of the cards, so at least
documentation is out there somewhere (Tasmania, IIRC ;-)
I'll let you know if I find the display; AFAIR it's an 8 line version.
For anyone else interested, I do have two power supply/logic cabinets
and the following cards:
16940801 P
16948051 C
16998650 D
16998692 H
16998734 J
Without the tech docs I have no idea what they are, but for anyone
needing one the info is out there.
Perhaps the person with the manuals will read this and come forward; I
don't believe they've been scanned.
m
On Sun, Dec 3, 2023 at 3:08 PM Chris Coley <ccoley(a)zaphod.com> wrote:
Why are you scrapping them?
Are they generally complete?
If there is enough to refurb into a unit I am interested. I'm in Sequim, WA.
Thanks
Chris
On Sun, Dec 3, 2023 at 12:01 PM Mike Stein via cctalk <cctalk(a)classiccmp.org>
wrote:
>
> Do any of you three or four TD700 owners out there need any parts? I'm
> about to scrap a couple (in the Toronto area).
>
> m
1:50 p.m.
On Mon, Dec 4, 2023 at 8:36 AM Mike Stein via cctalk
<cctalk(a)classiccmp.org> wrote:
... including the
technical manual with schematics of the cards, so at least
documentation is out there somewhere (Tasmania, IIRC ;-)
Shared from here since 2019...for those that missed it :-)
https://drive.google.com/drive/folders/1iihVNRfkd_zX_PwV30gKQTNLzLcnMEvm?us…
4:40 p.m.
Sorry about that; now that you mention it, I do recall you scanning
and posting the docs back then. Thanks!
I wonder if the fellow building one from scratch is aware of their existence...
So, it looks like some or all of it is going to you; I don't think
there's enough to put one back together anyway.
m
On Sun, Dec 3, 2023 at 4:50 PM Nigel Williams
<nw(a)retrocomputingtasmania.com> wrote:
On Mon, Dec 4, 2023 at 8:36 AM Mike Stein via cctalk
<cctalk(a)classiccmp.org> wrote:
... including the
technical manual with schematics of the cards, so at least
documentation is out there somewhere (Tasmania, IIRC ;-)
Shared from here since 2019...for those that missed it :-)
https://drive.google.com/drive/folders/1iihVNRfkd_zX_PwV30gKQTNLzLcnMEvm?us…
5:57 p.m.
Yeah with that limited set of parts I am less interested.
I used to have a TD700 chassis that was modified for other uses and used
the CRT monitor from a TD800 for another computer. But the Panaplex has
always been tempting.
I have an MT98x that I am planning to get working. Appears complete, but
currently non functional. Looking for docs for it if anyone has them as
opposed to reverse engineering it.
Thanks
Chris
1014
days inactive
1015
days old
6 comments
4 participants
participants (4)
-
Anders Nelson -
Chris Coley -
Mike Stein -
Nigel Williams