[cctalk] Re: Double Density 3.5" Floppy Disks

On 4/30/2024 5:13 PM, Wayne S wrote: There is also these 2 procedures to try…. From https://literature.hpcalc.org/community/hp9114a-ms-en.pdf TheHP9114Ausesdouble-sideddiscs.Dataiswrittenonboth sides of the disc. Thus the normal formatting procedure is double- sided formatting. Single-sided formatting is allowed for transferring data from older systems. See the next section for single-sided formatting. Before a flexible disc can be used for the first time, it must be formatted. Formatting establishes the directory and volume label as wellasverifyingthatthemediaisnotdamaged.Shownnextare two ways to format discs. Insert a blank disc into the disc drive. From the P.A.M. display, pressing the “File Manager” (f2) softkey gets you to a “Format” softkey. Press the key labeled ““Format” (f5) and answer the next questions. “Enter the disc to format”. The first disc drive is assigned the letter C. Type C: and press return. “Enter a volume label (optional).” The volume label is the name you want to call the disc. This can be up to 11 characters. For example, let’s call this disc “First”. Type First and press Return. The information is displayed on the first two lines below the cursor.PresstheStartFormatkey(f1)ifthesetwolinesarecorrect. “Formatting Disc. Please wait.” appears on the display. Formatting a disc takes about 1 1/2 minutes. The interleave used with this formattingmethodis8,theoptimalforHP Portable/9114A operation. After formatting is complete, pressing the “’Exit Format” (f8) softkey returns you to the main File Manager display. To exit File Manager press the “Exit File Manager” softkey. This ends the format procedure. ThesecondmethodofformattingdiscsistousetheMSDOS Format command. From the initial P.A.M. display, tabbing over to the area called “DOS Commands” and pressing “Return” allows you to use the DOS command called Format. The interleave used inthiscommand is8whichisoptimalforyourHP Portable/9114A system. Type FORMAT C: and press Return. “Press any key to begin formatting C:” is displayed. Press any key on the keyboard. Formatting takes about 1 1/2 minutes. After formatting is complete there is another prompt on the display ““Volume label (11 characters, Enter for none)?. *“Press “Return”if you don’t want a label or enter the name and press “Return” if you want to label the volume. When completed “Format another (Y/N)?” appears on the display. Typing “N” gets you back to entering MS DOS commands. Type “EXIT” to return to P.A.M. Formatting Single-sided TheHPPortable/9114Asystemcanformatdouble-sideddiscsina single-sided format. This is allowed for data compatability with other 3 1/2-inch disc systems. There is a utility called “Format.Com”ontheutilitydiscsuppliedwithyourHP Portable computer.Youmustloadthe“Format.Com”utilityintoyourHP Portable. Use the following sequence. PlacetheUtilitydiscintoyourHP9114A. TabovertotheDOS Command blockandpressStartApplic. From theMS DOS command displaytype: COPY C: FORMAT.COM A: and press Return This loads the utility and allows you to use the extra parameters explainedinthefollowingFORMATcommand. TheMS DOS command thatallowsthiscompatibilitywithits parameters isshown next. Format C:/W -Single-sided /X -Double-sided with 256 byte sectors /Y -Double-sided with 512 byte sectors /Z -Double-sided with 1024 byte Sent from my iPhone >> On Apr 30, 2024, at 14:39, Mike Katz <bitwiz(a)12bitsbest.com> wrote: > > Thank you for your help. > > That is the command I am using on the 41 to try and format the disk. With a directory size of 60. > > On 4/30/2024 4:22 PM, Wayne S via cctalk wrote: >> Also this article refers to a set of commands for this drive. The NEWM command formats a new disk. >> Link is https://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/articles.cgi?read=78 >> >> >> Sent from my iPhone >> >> On Apr 30, 2024, at 14:07, Wayne S <wayne.sudol(a)hotmail.com> wrote: >> >> What kind of floppies did Hp recommend to use with this drive? >> >> Sent from my iPhone >> >> On Apr 30, 2024, at 13:55, Fred Cisin via cctalk <cctalk(a)classiccmp.org> wrote: >> >> On Tue, 30 Apr 2024, John Herron via cctalk wrote: >> Yup, that's all I used to do. Some scotch tape over the floppy disk hole to >> make the system see it as DD. If it didn't automatically format as 720, you >> could specify size or sector count with format.com in dos. >> >> Somemedia sensors are optical; use opaque taps. >> >> I did hear folks say it wasn't always reliable (similar to 5.25 disks being >> formated on a high density drive) but I never saw any problems in my >> limited use. >> >> 3.5" are 600 VS 750 oersted; >> 5.25" are 300 vs 600 Oersted; >> a low density 5.25 formatted as "high density" won't do well; >> a high density 5.25" (1.2M) formatted as low density ("360K") sill self erase VERY soon, sometimes before you can even get it over to another machine. We had a college purchasing agent in bed with "Roytype", who kept giving us "1.2M" floppies ofr out TRS80s; they self erased very soon. >> >> -- >> Grumpy Ol' Fred cisin(a)xenosoft.com >