I was poking around eBay and up came a listing for a DEC "mini exchange", DFMSA. What is that? The name doesn't sound familiar. It looks like a box with a bunch of DB25 connectors on the back, but that doesn't help much.
paul
A little while ago I was contacted by a person working for a big swedish
company that asked if I was interested in saving a HP 2116B from being
scrapped. On Monday I was able to pick up not just the HP 2116 but also
some other HP21xx series machines that all were destined to be scrapped
next week.
When looking deeper into the HP 2116 I discovered that it was missing two
non-optional boards. Without these boards the machine will not even power
up. The boards missing are the power failure board ( 02116-6175 or
12588-6001) and the memory module decoder board ( 02116-6300 or 02116-6274
).
It is probably possible to create some kind of replacement boards but it
would be really nice to have the original boards in such a nice machine.
Is there anyone that has these boards that want to sell or trade them for
something?
/Mattis
Anyone in the 603 area code interested in this (below)? I received an
inquiry through kennettclassic.com but we don't need it. If interested
contact me through kennettclassic.com/conatct.cfm or by private email. I
don't know the person, but it looks like they want to sell, not donate.
Bill
"... *Hello, I have an old HP 1611A logic state analyzer from the 80's that
was previously owned by Parker Brothers, no doubt used to test out chips
for their electronic games and toys. I was wondering if you might know
where I might be able to sell it or if you have any interest in it
yourselves. It has all the documentation, including a leather bag intended
to hold all the manuals. It powers on and still works. While I don't have
any chips to test it with, I have seen it function and work with chips when
I purchased it. *..."
Hi all!
I noticed that while the Emulex SC03-B1 manual is on Bitsavers, the
instructions for how to patch and use this board on a 22 bit Q Bus
system are not. In the manual it says to "Write emulex".
Fortunately I did 40 years ago and I have the "Emulex Disk Capacity
Patches to DEC PDP-11 Operating Systems" manual which is now scanned and
online at https://www.crystel.com/dec/sc03
Emulex document ID is PD9951002 Rev A, March 1983. Covers Rsx11M 3.2,
4.0, RSTS/E, and M+ versions at that time.
Every page is scanned as a 300 DPI TIFF image, and there is a PDF
version of the whole manual as well.
Apparently they use the RH70 Unibus driver (which supports 22 bit
without the unibus map) and then change a few bits to make it work on Q
Bus.
Enjoy and bitsavers owner please stick this in your archives as well.
Chris
In the early 70s I worked at a place that had 2 S360/40s. On the 23rd floor of a 45+ year old building. At least 8 tape drives, 2 control units for them, 2 full banks of 2314, 2 1403 printers and 2 2540 card machines.
I would assume updated wiring would have to have been run up 23 floors. When I started there was 1 S360/30. Don’t know if the normal building wiring would need to be updated for that.
I, for one, have fond memories of the S/360-20, 30 and 40. I ‘grew’ up running and programming those systems.
FWIW, I have a punch card archive at www.ibmjunkman.com
Does anyone have, or has even seen, a Computer Data Systems "Versatile 2"
s-100 computer from 1977? The company that produced it was from Newark,
Delaware USA and I have been trying to track one down because I live nearby.
Thanks
Bill
We're still waiting for VCF PNW 2020, but while we wait ...
https://sdf.org/icf/
(This is a much smaller event than any VCF. It's also quite fun because
it's not overwhelming.)
-Mike
