Overclocked TI Silent 703 at 1200 bauds?

[Curious Marc]

Yes, I tried switch #4 and that did not do it. I opened it up, no other obvious jumpers. The processor doesn’t even say TMS 7041, it’s a custom numbered part. Not that I am complaining, I am fine with my blazing fast gamer’s TI 703 with overdrive. I’m just surprised they did not label it anywhere on the machine or even change the product naming. Like TI 703 Turbo or something!
Marc

> On Oct 30, 2021, at 9:44 AM, Ron Pool via cctalk <cctalk at classiccmp.org> wrote:
> 
> I hadn't known about 1200 bps Silent 700s.  I just found a TI Silent
> 700/1200 on eBay and it is now on its way to me.  If I can figure out if/how
> it can toggle between 300 and 1200 bps, I'll let you know.
> 
> Meanwhile, I can tell you that a manual I have for a model 703 says that
> configuration switch 4 is "not yet used".  1 & 2 are for parity, 3 is for
> print width (80/132 columns).  Maybe switch 4 toggles between 300 and 1200.
> If you lift the smoky gray cover, you'll not only gain access to the roll of
> paper but also, just above the keyboard, an expansion slot on the left-hand
> side and the four DIP switches just to the right of the expansion slot.  The
> DIP switches are found below a small rectangular cutout in the terminal's
> plastic case.
> 
> On a model 703 I have there is a label under the paper roll that tells what
> the 3 working DIP switches do and tells some of the CMD key sequences that
> can be use on models 703, 707, and 709.  Apparently the same label was used
> for all three basic models.  But maybe a unit with a 1200 bps option has a
> label that lists a function for DIP switch 4 or a CMD key sequence for
> setting communications speed.
> 
> Another possibility is the auto-access cartridge that can go in the
> expansion slot.  The 700/1200 I have on the way to me includes an
> auto-access cartridge.  Maybe it allows choosing between 300 and 1200 bps?
> If you have an auto-access cartridge in your terminal, try some of the
> commands for it that are listed on the quick reference card
> http://www.bitsavers.org/pdf/ti/terminal/silent_700/2310610-0001_Silent_700_
> Auto-Access_Cartridge_Quick_Reference_Card.pdf .
> 
> If you figure out how to toggle between 300 and 1200 bps, please share the
> trick.
>