TurboDOS for S-100, IMS or L/F Technologies

[Bill Degnan]

I checked I do not have the OS disk, at least not in the obvious places.

On Wed, Jun 12, 2019 at 1:30 PM Jonathan Haddox via cctalk <
cctalk at classiccmp.org> wrote:

> Sure, I will list out the hardware I'm planning on using.
> IMS A645 Z-80 Processor
> IMS A631 serial/parallel I/O
> IMS A930 Floppy controller
> IMS A465 64K RAM
> IMS 1100 Winchester Hard disk controller
> IMS 862 User Processor (Z80)
> IMS 1081 User Processor (186)
> IMS 1120 Tape Controller
> Earth Computers ARCnet board
>
> --------------------------------------------
> On Tue, 6/11/19, Bill Degnan <billdegnan at gmail.com> wrote:
>
>  Subject: Re: TurboDOS for S-100, IMS or L/F Technologies
>  To: "Jonathan Haddox" <new_castle_j at yahoo.com>, "General Discussion:
> On-Topic and Off-Topic Posts" <cctalk at classiccmp.org>
>  Date: Tuesday, June 11, 2019, 6:47 PM
>
>
>
>  On Tue, Jun 11,
>  2019, 12:55 PM Jonathan Haddox via cctalk <cctalk at classiccmp.org>
>  wrote:
>  I'm
>  restoring an IMS - L/F Technologies S-100 Bus computer.
>  I've got all the pieces except for the Operating
>  System.  I'm hoping that someone here may have a disk
>  stashed away.  From the literature I have read, I would
>  need TurboDOS version 1.40a or 1.41c from IMS or L/F
>  Technologies.  I've seen TurboDOS 1.3 versions out in
>  the wild from IMS, but the 1.4 version was greatly enhanced
>  and offered better compatibility with my specific
>  hardware.  I'd be much obliged if anyone can help.
>
>
>
>  Thanks,
>
>
>
>  Jonathan
>
>  new_castle_j  at yahoo
>
>  Can you detail the associated
>  hardware (drive controller, drive model, CPU,
>  etc.)
>
>