Got a Rainbow 100 and ...

[Tony Duell]

On Sun, Nov 11, 2018 at 6:56 AM Alan Perry <aperry at snowmoose.com> wrote:
>
>
>
> On 11/10/18 10:51 PM, Tony Duell wrote:
> > On Sun, Nov 11, 2018 at 6:47 AM Alan Perry via cctalk
> > <cctalk at classiccmp.org> wrote:
> >
> >> What I got was the system unit, a VR201 monitor, a keyboard, a vertical
> >> deskside stand for the system unit, and a LQP02 daisy wheel printer. I
> >> also got the MS-DOS and CP/M doc and software slip cover boxes. The CP/M
> >> disk box is still sealed and the CP/M docs are still in shrink wrap. The
> >> specific need that the seller bought it for involved MS-DOS, not CP/M.
> >
> > Does it have any of the optional expansion boards (hard disk controller,
> > RAM, graphics) in it?
>
> Right now I am looking up how to open up the system unit and see what's
> inside.

There's a catch on each side under the 'step'. Release those and the
cover comes off. Unplug the drive and power cables from the main
PCB assembly (at the rear right), undo the thumbscrews on the back
and the PCB assembly slides out.

-tony