11/04 Project

[John Welch]

On 12/14/2017 6:47 AM, Noel Chiappa wrote:
>      > From: John Welch
>
>      > CLR
>      > 765000
>      > LAD
>      > EXAM
>      > 'Bus Err' light comes on.
>
> Oooh, that's very interesting, and illuminative. The ROM isn't working (so
> there's no way for the software console to work - its code is in that ROM).
>
> So look at Section 1.5 of the Technical Manual
>
>    http://bitsavers.org/pdf/dec/unibus/M9312_TechRef.pdf
Will do.  I have 4 M9312 cards.  One I know I pulled from an 11/04, the 
others from 11/04 or 11/34 (or 11/34a)
[...]
> Also, while we're at it, it's probably worth making sure the CPU will
> run. Do this:
>
>    CLR
>    LAD
>    777		(This is a 'branch .' instruction)
>    DEP
>    EXAM		(Should display '777')
>    CLR		(I think you can dispense with these
>    LAD		two, but just to be safe...)
>    CTRL-START
>    'Run' light should come on
>    CTRL-HALT
>    'Run' light should go out, should display '0' (or maybe '2', I forget)
It read 000000
>
>
>      > Do you know which color wire (red, clear, black) goes to which festoon
>      > connector (TP1, TP2, TP3, TP4)?
>
> I would leave them all disconnected for the moment; you don't need them. One
> is the 'boot' switch on the console, and its ground. The other is the 'boot on
> power on enable' (a duplicate of S1-2), and its ground. Since we're trying to
> manually start the ROM console from the front console, they aren't needed for
> that.
>
> I don't recall offhand which one connects to which - I will have to check.
>
>      > Don't want to blow anything up.
>
> Not sure it will harm anything if you connect things wrongly, but that's
> not tested.
>
> 	Noel

-- 
Sincerely,
John Welch
281-353-4706 Home
713-725-7017 Cell
:qw