PDP-11 RL02 disk emulation

Scott Baker scott.l.baker at gmail.com
Mon Oct 24 13:28:05 CDT 2016


Hi Noel,

>> Any chance it could be put into 'production'?
Sure, if there is interest, I could make a run of boards.

>> Also, what FPGA board are you using? I assume it's one that has an SD
>> card socket or something, for actually storing the bits on?

My project is just an interface board for an existing RL02 emulator
project: www.pdp11gy.com  There are a multiple project revisions listed on
the pdp11gy.com site that use different Altera FPGA dev boards: DE0 Nano,
DE0 Nano SOC, and BeMicro CV.

I was planning to use a Terasic DE0 Nano dev board since these boards can
be found on eBay from $50 to $100. The DE0 nano does not have an micro-SD
card socket which is why there is a socket on my interface board.
http://sierracircuitdesign.ddns.net/temp/RL02

The DE0 Nano SOC, and BeMicro CV dev boards have micro-SD card sockets, so
if you used one of those, then you would not need to populate the micro-SD
socket on the interface board. According to the author of the
www.pdp11gy.com RL02 project, the 40-pin headers on DE0 Nano, DE0 Nano SOC,
and BeMicro CV are compatible, so you could use my interface board with any
of these boards.

Regards,
Scott


More information about the cctech mailing list