R: Re: IBM RT memory boards

[supervinx]

I own two 7012 and could be interested in, if you can shipping overseas :)

-------- Messaggio originale --------
Da: Sean Caron <scaron at umich.edu> 
Data:25/07/2015  16:17  (GMT+01:00) 
A: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at classiccmp.org>,Sean Caron <scaron at umich.edu> 
Oggetto: Re: IBM RT memory boards 

If you're going to toss them otherwise, I'd be happy to keep them and give
them a good home until someone came along who could use them ... but I'll
take a backseat to anyone who's actually got one of those systems.

Best,

Sean


On Sat, Jul 25, 2015 at 9:29 AM, Mike Stein <mhs.stein at gmail.com> wrote:

> Hello,
>
> Thank you for your interest but it looks like my 70-year-old gray cells
> have let me down again; it's been a few years since I scrapped this system
> but after some discussion it turns out that these boards are actually for
> an early RS/6000 (7012/7013).
>
> My apologies for raising your hopes/wasting your time ;-(
>
> (Anybody still interested?)
>
> mike
>
> ----- Original Message ----- From: "supervinx" <supervinx at libero.it>
> To: "General Discussion: On-Topic and Off-Topic Posts" <
> cctalk at classiccmp.org>
> Sent: Saturday, July 25, 2015 5:54 AM
> Subject: R: IBM RT memory boards
>
>
>  I'm interested in, if you can ship overseas
>>
>> -------- Messaggio originale --------
>> Da: Mike Stein <mhs.stein at gmail.com>
>> Data:24/07/2015  18:21  (GMT+01:00)
>> A: "General Discussion: On-Topic and Off-Topic Posts" <
>> cctalk at classiccmp.org>
>> Oggetto: IBM RT memory boards
>>
>> I've got 4 4Mx32 memory boards here from an old RT
>> (AFAIR) in case anybody has a use for them.
>>
>> Each board has 8 512Kx40 (32 bits + 8 ECC) modules
>> (20 pcs. 4x256).
>>
>> Edge connector is DS 42+49
>>
>> m
>>
>>
>>
>