RA81 removal

[Johnny Billquist]

On 2015-01-26 14:50, Noel Chiappa wrote:
>      > From: Johnny Billquist
>
>      > you then have some additional small locks and tricks if you want to
>      > extend them beyond their normal point, as needed if you actually plan
>      > to remove them from the slides.
>
> Sorry, I was not clear enough: that is exactly what I want to do - remove
> them from their slides (i.e. from the cabinet).
>
> I do know how to do that by taking out the two machine screws in each side
> which secure the slides to the disk case.
>
> However, is there some way to remove the drive completely, without doing
> that? I.e. a way to separate the slide into two parts, one of which stays
> with the cabinet, and one with the disk drive?

Oh!
Yeah, I didn't fully understand what you were looking for.

Well, no, there is no way to split the slides. You are supposed to 
remove the two tiny screws that holds the slide to the drive when you 
remove it.

	Johnny