Tandon Track 0 adjustment

[Chuck Guzis]

On 8/27/21 10:22 PM, Mike Loewen via cctalk wrote:
> 
>    What's the recommended method for adjusting the track 0 switch and
> track 0 stop on a Tandon TM100-2, if you don't have an alignment disk? I
> do have a scope.

I'll also add that too many people go into the business of re-alignment
without first cleaning the track 0 sensor.  Since everything is keyed
off of the track 0 reference, this can lead to grief later on.

Clean the sensor first and see if that doesn't clear up your alignment
issues.

--Chuck