Tandon Track 0 adjustment

[Chuck Guzis]

On 8/27/21 10:22 PM, Mike Loewen via cctalk wrote:
> 
>    What's the recommended method for adjusting the track 0 switch and
> track 0 stop on a Tandon TM100-2, if you don't have an alignment disk? I
> do have a scope.

Just use a known-good disk and adjust for best results.  That's about
all you can do without a calibrated reference floppy.

There were also non-scope digital alignment disks with sectors recorded
at various offsets and azimuths from ideal.  Those could be handled by
simple code that read sector IDs.

--Chuck