DEC ME11 Memory Expansion on eBay

jim stephens jwsmail at
Fri Aug 20 23:09:24 CDT 2021

I had an 11/15 with one of these, no memory in the main box.

Both stolen along with an 8/M

Wondering if anyone saw such for sale in the last 5 years.   Private 
email if so.

On 8/20/2021 4:04 PM, Steve Malikoff via cctalk wrote:
> I just saw there is an ME11 Memory Expansion unit on eBay (not mine), stamped 'M11'.
> Until seeing this one I had not heard of any other units out there apart from the one I recovered
> (ex-BHP steelworks) a few years ago. Mine was connected by a flexprint cable to a rebadged PDP-11/15.
> If anyone here ends up with it, I have an OpenSCAD model of the Mazak bracket p/n 1211221 that holds
> the regular 5-1/4" DEC fascia panel onto the front of the H-909 cabinet this unit uses.
> This is the same cabinet as the slimline PDP-11/05 and to be honest when I found the ME11 that's
> what I thought it was, and that the console and CPU boards were missing. I then found the fascia panel
> with the original brackets close by, and it fitted exactly.
> I've printed a few from PET and they work as well as the originals (including the threaded hole), so
> I could do a few more for whoever gets the eBay one should they want them.
> I am slowly scanning the ME11 print set too as I've not found any online copy out there so far.
> Steve.

More information about the cctalk mailing list