[Bill Degnan]

Thanks chris...its a 37 pin on the vt278 end.

On Wed, Feb 19, 2020, 7:10 AM Chris Zach via cctech <cctech at classiccmp.org>
wrote:

> Hm. I have the bulkhead 25 pin to 40 pin interface thing from an RX02 in
> a box, I'm not using it as I am going from the pdp11's RX01 straight to
> the drive's controller. That should give you the pinout, want to borrow it?
>
> C
>
> On 2/18/2020 10:02 PM, Bill Degnan via cctech wrote:
> > Looking for a DECMATE (VT-278 model) RX278 Floppy Drive Interface
> Connector
> > cable, part number is RC26N-2L  It's a 37 male-25 pin male cable.
> >
> > Here is photo I took of one (not mine)
> >
> https://www.vintagecomputer.net/digital/DECmate/DECMATE_VT278_PortsDriveCable.jpg
> >
> > I have the pinouts for the 37-pin end but not the 25-pin end.   If no one
> > has a cable I can do a continuity test of the cable next time I have
> access
> > one, but it's not easily available.
> >
> > I am located near Philadelphia.
> >
> > Thanks
> >
> > Bill
> >
>