Connecting SIMH to teletype via USB

[Stefan Skoglund]

lör 2019-09-14 klockan 09:22 +0200 skrev SPC via cctalk:
> El sáb., 14 sept. 2019 6:09, J. David Bryan via cctalk <
> cctalk at classiccmp.org> escribió:
> 
> > On Friday, September 13, 2019 at 18:31, Charles via cctalk wrote:
> > 
> > > I'm using a slightly older SIMH and user's guide (3.8 something).
> > > This
> > > SIMH will not allow Set Console Serial, apparently
> > 
> > Serial support is not present in versions prior to 4.0.
> > 
> 
> I plugged in one DEC VT220 terminal to a version of SIMH 3.x running
> UNIX
> V7 (and CP/M and CTSS but that's another story) about four years ago,
> by
> serial port. I used one utility program (available for free at this
> time)
> to redirect a serial port to tcp/ip. I don't have its name at hand
> now,
> sorry.
> 
> Regards,
> Sergio

Which is basically what you would find inside a console port server ie 
a box with a lot of serial ports connected to console ports on servers.
ssh and telnet to specific ports or if the console server has several
ip addresses assigned ssh to port 22 on an specific IP address.