VT52 stand

[Henk Gooijen]

Marc,

The bottom side has _5_ feet with casters.
On the top side is a metal plate attached, but it is not flat.
It is sort of curved to the center to make the plate sturdy.
The VT52 is mounted on that plate with (IIRC) 8 screws.
The screws go into the base of the VT52. The screws are
located at the 4 corners and in the middle of each side.

Henk, PA8PDP



________________________________
Van: cctech <cctech-bounces at classiccmp.org> namens Marc Howard via cctech <cctech at classiccmp.org>
Verzonden: Saturday, February 23, 2019 5:10:04 AM
Aan: General Discussion: On-Topic Posts Only
Onderwerp: VT52 stand

Does anyone on the list have or have seen the stand that DEC sold with the
VT52?  I'm just curious; does the stand screw into holes on the monitor or
does it just sit on top?

>From what I've seen before it just looks like an office chair base with a
top that is the correct size.

Thanks,

Marc