GoTEK SFR1M44-U100...

[Chuck Guzis]

On 07/13/2018 07:57 PM, Grant Taylor via cctalk wrote:
> On 07/13/2018 04:13 PM, Chuck Guzis via cctalk wrote:
>> http://torlus.com/floppy/forum/viewtopic.php?t=1683
> 
> Thank you.
> 
>> In the as-provided form, it's just a bunch of sector-by-sector data
>> written to a predefined set of addresses on the flash drive.  No file
>> system at all.
> 
> Reading about the SFR1M44-U100 and the raw sector allocation made me
> think about modifying the Linux kernel for the 3rd time.  I feel like it
> should be possible to add a partitioning scheme that is the SFR1M44-U100
> layouts.  I.e. disk1 corresponds to memory address 1, disk2 corresponds
> to memory address 2, etc.
> 
> The first time was to hack the Emulex LightPulse driver to support the
> high LUN numbers of the Compaq RA-4000 & RA-4100.  The second time was
> pontificating the possibility of causing the Linux bridge code to
> forward frames that bridges are supposed to filter, to support a very
> specific use case.
> 
> 
> 


-- 
--Chuck

Sent from my digital computer