Dilog DQ604 RL01 / RL02 emulation on ST506/ST412 disk.

[Chris Elmquist]

On Tuesday (08/28/2018 at 08:22PM +0200), Mattis Lind wrote:
> Den tis 28 aug. 2018 kl 19:50 skrev Chris Elmquist <chrise at pobox.com>:
> 
> > On Tuesday (08/28/2018 at 11:25AM +0200), Mattis Lind via cctalk wrote:
> > > Den sön 26 aug. 2018 kl 09:26 skrev Paul Birkel via cctalk <
> > > cctalk at classiccmp.org>:
> > >
> > > > Which length band did you find worked best as a replacement?
> > > >
> > >
> > > I used the white three inch plastiband. Rik Bos told me that the best way
> > > is to heat the old band slightly. I used a SMD desoldering air gun which
> > I
> > > set to 100 degrees centigrade and then blowed heat air onto the tape from
> > > some distance until it changed from a white matte surface into a darker
> > > brown surface.
> >
> > Hmm.  3" plastiband seem to be rare or my Google-foo is pretty bad.
> >
> > Do you have a source for these?
> >
> > I have found only 2-1/8", 4-1/4" and 6" so far.
> >
> 
> The SF-7000 contain a number of different sizes. 1 1/2 inch, 2 1/8 inch, 3
> 5/8, 4 1/4 inch and 6 inch
> 
> http://www.officedirectsupply.com/sf7000_baumgartens_plastiband_77071_prd1.htm
> 
> On the other hand I haven't found a source for the 6 inch variant (that
> actually could deliver them) other than in the mixed package.

Got it. Thanks.  So, 3-5/8" is actual.  I was being too picky about your
3" statement :-)

It seems to be well known that the number of each size you get in the
SF-7000 package is, umm, random...  so a guy needs to get several packages
and hope for plenty of white ones.

Thanks again,

Chris
-- 
Chris Elmquist