The RSTS riddle.

[Rod Smallwood]

Hi

      Further to my posts this morning I have one last hurdle to jump.

1.  I  have a  VAX with a TK70 attached and a TQK70 controller.

2.  The tape drive works just fine.

3.  Also on the VAX I have the correct tape (.TAP) image file for a 
RSTS/E V10 install tape.

4. I would like to copy the .tap file to the tape so as to end up with a 
bootable install tape.

5. I then power down the VAX and move the controller to an 11/83. (The 
drive is external with its own PSU)

6. Boot the install tape and go from there.

So suggestions please as to how to do  4.

Rod Smallwood