Acard - WAS::Re: AT&T 3b2 vs SCSI2SD drive replacement

[Jerry Kemp]

Thanks for the link.  I wasn't aware of the Acard device.

I guess I should extend my question, so, does anyone have an Acard HDD 
replacement in their AT&T 3b2?

If so, how is it working out for you?

Jerry




On 06/ 1/16 01:03 PM, Swift Griggs wrote:
> On Wed, 1 Jun 2016, Jerry Kemp wrote:
>> I was reviewing the online documentation for SCSI2SD, specifically here:
>> <http://www.codesrc.com/mediawiki/index.php?title=SCSI2SD>
>> and I specifically see that the AT&T 3B2/600 is supported.
>
> I neither have a AT&T 3B2 nor a SCSI2SD. Sorry. I do however, have
> experience with lots of ACARD adapters. The one that's most like the
> SCSI2SD is the ARS-2000SUP. That's the 50-pin SCSI/SCSI2 version. It works
> great in my older SGIs (Indy, Challenge S, and Indigo), a Quadra 660AV,
> Sun Sparc Classic, and I've also tested it in an Amiga 3000 where it also
> works fine. I use them with SSDs to push the latency as low as I can go. I
> realize the disk throughput is never going to be great just due to the
> limitations of fast SCSI2.
>
> http://www.acard.com/english/fb01-product.jsp?idno_no=249&prod_no=ARS-2000SUP&type1_idno=6&ino=43
>
> -Swift
>