H960 logo panel

Noel Chiappa jnc at mercury.lcs.mit.edu
Tue Oct 13 12:48:44 CDT 2015


    > From: Henk Gooijen

    > I will probably download everything ... in my experience, websites
    > with "/~xxxx/" in it seem to disappear after "some" time :-/

True, but pages maintained by institutions are almost equally bad about
staying put! Many's the time I've clicked on a link, and the target's gone...

I make a real effort to try and not not kill any URL to my Web site that ever
worked (via redirects, if needed). I wish institutions were the same, but
alas, for most Web-masters, they apparently seem not to give a rodent's
posterior.

But the downloading is a good idea - the more copies, the better (although in
this particular case, it's not like the content is irreplacable).


    > I have probably all PDP-11 models (except the PDP-11/50)
    > ...
    > I am not going to disassemble just for a scan.

Well, the /45 front panel is easy: take out the 4 screws holding the bezel on
(quite easy - unlike, say, removing an H7420 to clean it - something I am
probably going to have to do), and then take out the 3 counter-sunk screws
holding the panel on (ditto), remove the two knobs (ditto again) - done! And
equally easy to reverse the process.

    > I could take pictures, but as you say, edges will warp a little.

We've already got pretty good pictures of the 11/45 panel, and the RP11-C.
There are no RF11 or RK11-C images (that I know of - the RF11 manual only has
a drawing, and the RK11-C manual, not even that), so if you have either of
those, a picture would be better than nothing.

	Noel


More information about the cctalk mailing list