PDP11GUI v1.46

Ian S. King isking at uw.edu
Fri May 8 19:27:33 CDT 2015


One person's experience:

I trashed my Mac's OS X install by trying to go the Homebrew route for
WINE.  After restoring it, I tried WineBottler, which contains a compiled
version of WINE - it works fine, and I now have the UI running.  Now to
configure things….  I'm looking forward to playing with this.  Thanks,
Jörg!  -- Ian

On Fri, May 8, 2015 at 2:08 PM, Josh Dersch <derschjo at gmail.com> wrote:

> On Fri, May 8, 2015 at 11:59 AM, Seth Morabito <lists at loomcom.com> wrote:
>
> > * On Tue, Apr 28, 2015 at 04:02:15PM +0200, Jörg Hoppe <
> > j_hoppe at t-online.de> wrote:
> > > PDP11GUI is at v1.46 now.
> >
> > Hello Jörg,
> >
> > I'm having a lot of trouble with pdp11gui 1.46. My goal is to transfer
> > an RD53 image from simh to a physical PDP-11/73 with an RQDX3
> > controller.
> >
> > Whenever I attempt to run MACRO11 or to load the MSCP driver, I
> > receive the error message:
> >
> >    "E/A Fehler - 103"
> >
> > I don't know what's going on. I assume this means that it can't find
> > the MACRO11 binary to compile the driver, but it is located in the
> > pdp11gui directory. I even made sure to add this directory to my PATH,
> > just in case that was needed, but it does not seem to have helped.
> >
>
> I hit the exact same issue on my machine; I tried running it with Admin
> privileges and that seems to have worked around the problem.  Apparently
> something PDP11GUI is doing with the MACRO11 assembler requires more
> privileges... that should probably be fixed :).
>
> Otherwise, it's a nice piece of software (and I also very much appreciate
> the XXDP database that he's put together...)
>
> - Josh
>
>
> >
> > Am I doing something wrong?
> >
> > Best Wishes,
> >
> > -Seth
> >
>



-- 
Ian S. King, MSIS, MSCS, Ph.D. Candidate
The Information School <http://ischool.uw.edu>

Archivist, Voices From the Rwanda Tribunal <http://tribunalvoices.org>
Value Sensitive Design Research Lab <http://vsdesign.org>

University of Washington

There is an old Vulcan saying: "Only Nixon could go to China."


More information about the cctalk mailing list