SS10 console settings

[Mike Ross]

I have *only* the serial console. No working keyboard/mouse/screen.

Mike

On Sun, Jun 14, 2015 at 8:45 PM, r.stricklin <bear at typewritten.org> wrote:
>
> On Jun 14, 2015, at 1:02 AM, Mike Ross wrote:
>
>> I can't even see the hardware messages at power-on; just garbage - on both
>> systems, at every baud rate I've tried on the emulator. Nowhere near
>> booting OS.
>
> If you hold down STOP-D while powering on, the system will go into diag mode. It'll show you extended diagnostics on the serial port, using 9600 8N1. This may give you extra information about the nature of your problem.
>
> I haven't double checked that the serial port parameters do reset in this mode, but several other important things for sure do.
>
>
> ok
> bear.
>
> --
> until further notice
>



-- 

http://www.corestore.org
'No greater love hath a man than he lay down his life for his brother.
Not for millions, not for glory, not for fame.
For one person, in the dark, where no one will ever know or see.'