using new technology on old machines. Was: PDP-12 Restoration at the RICM

Dave G4UGM dave.g4ugm at gmail.com
Mon Jul 20 16:03:10 CDT 2015


> -----Original Message-----
> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Chuck
> Guzis
> Sent: 15 June 2015 18:25
> To: General at classiccmp.org; Discussion at classiccmp.org:On-Topic and Off-
> Topic Posts
> Subject: Re: using new technology on old machines. Was: PDP-12 Restoration
> at the RICM
> 
> On 06/14/2015 12:41 PM, Simon Claessen wrote:
> > as long as it is done in a way that it can be restored to its
> > original, i have no problems in using newer technology in older
> > machines. we have a alix sbc build into our tek 4002a for
> > demonstrational purpouses, all done without damaging or altering the
> original machine.
> 
> I'm a bit more pragmatic.  Whatever it takes to get something running, I'll do
> it.  For me, that's the entire point of having the old stuff around.  Otherwise,
> a non-working box is scarcely better than any other piece of antique e-
> waste. 

I think so long as the machine isn't unique then I think this is a reasonable approach to take.

> If there's an accurate emulation available on modern hardware, I'll
> use that rather than play with some old, cranky piece of iron.
> 

That can be fun to.

> Others may certainly have different opinions.
> 

I think you have to be pragmatic. I have now finished my Baby Baby Video here:-

https://youtu.be/OGcAmrFoRrY

Its pretty much cycle accurate...

> --Chuck
> 

Dave
G4UGM



More information about the cctalk mailing list