Freight recommendation for a teletype?

[drlegendre .]

For real? That's just so cool!

And yes, this list has more than its share of extraordinary members. Just
today, after putting out a request for some Osborne boot media - not only
did half a dozen or more learned individuals respond to my questions, but
+two+ of them offered to locate and / or send bootable media for the
machine.

It's a great group of folks, and I'm genuinely thankful to be in their
company.

On Mon, Aug 17, 2015 at 10:28 PM, Randy Dawson <rdawson16 at hotmail.com>
wrote:

> Hi John,
>
> A testament to the extraordinary community that is classiccmp.
>
> I
>  will certainly take you up on it, and get you a check, and/or some of
> the other great junk lying around here.  I'm pretty well equipped with a
>  good electronics lab.  Do you need a scope?  I have a few Tektronix
> digital scopes and I cant possibly use them all.  100 MHz ....
>
> I'm
>  not sure about the lockdown, I imagine when its undone the bolt is
> stored in a available hole inside, and possibly is still there.
>
> I
>  will see what comes back from craters and freighters and UShip, the
> thing has to be taken off the pedestal  and wrapped/banded onto a
> pallet.
>
> Let me know what you need, and hey,
>
> Thanks,
>
> Randy
>
> > Date: Mon, 17 Aug 2015 21:49:59 -0500
> > To: rdawson16 at hotmail.com
> > From: jfoust at threedee.com
> > Subject: RE: Freight recommendation for a teletype?
> >
> > At 09:29 PM 8/17/2015, you wrote:
> > >123 N Washington St. Elkhorn WI 53121.
> > >I asked for a quote from Craters and Freighters, and the UShip site.
> >
> > I'm not sure if I can help, but I thought I'd chime in.
> >
> > I'm 45 minutes from there, 30 minutes if I'm at my fiancée's place.
> > (Jefferson, WI and Janesville, WI, respectively.)
> >
> > I do have a friend with a loading dock and pallets and wrap.
> >
> > You do need to lock down the upper machinery with the shipping bolt
> > or it'll destroy itself, depending on the shipping method.
> >
> > I have a 33 and a 28, too.
> >
> > - John
> >
>