On Tue, Dec 30, 2025 at 1:06 PM Francis Massen via cctalk
<cctalk(a)classiccmp.org> wrote:
PS: I am looking for a Kermit version usable with my
P2000C (it is the
2010-1 model, very similar to the 2012); everything I tried until now did
not work correctly...
There's a 'kermit.imd' disk image here :
https://download.homecomputer.museum/#Files%2FPhilips%2FP2000C
Have you tried that one? I've not had a chance to put it on a real
floppy yet, I've got another Philips computer in lots of bits here....
I trust you know the 'gotcha' with the serial port on the P2000C.
Namely that it's possible to use synchronous as well as asynchrous
modes. As a result, the clock inputs to the Z80A-SIO channel A are
normally sourced from pins 15 and 17 of the comms connector. The baud
rate generator drives pin 24 of said connector. You can either
re-jumper J12 as shown in the service manual or simply link 24-17-15
in the DB25 connector.
-tony