14 Jan
2025
14 Jan
'25
4:26 a.m.
Hi Dave,
I'll send this to the group, I suspect my email made it into your spam.
Doug
---------- Forwarded message ---------
From: Doug Jackson <doug(a)doughq.com>
Date: Tue, 14 Jan 2025, 6:05 am
Subject: Re: SBC6128
To: <dave.g4ugm(a)gmail.com>
Hi Dave,
I was just researching the IOB6120 (I had an 8 at the end of the model..
sigh - memory is often faulty)
WOW - I had no idea that existed. I also had no idea that the
community picked up Bob's designs and ran with them so enthusiastically - I
feel like I have been under a rock for quite a while.
I would be very very happy to purchase your board + IOB that you have put
together - If the enclosure is not ideal, I am very happy to update that -
these little boards are awesome.
Just let me know a Paypal address and shipping details.
Kindest regards,
Doug Jackson
em: doug(a)doughq.com
ph: 0414 986878
Follow my amateur radio adventures at vk1zdj.net
On Tue, 14 Jan 2025 at 05:37, Doug Jackson <doug(a)doughq.com> wrote:
Hi Dave,
Thanks so much for that.
Yes, postage is a pain, but necessary.
If you are not using it, then the partially built one makes sense
(assuming you can find the programable logic and CPU).
Failing that, then I don't mind paying the 250 Pounds for the built board
as long as it's complete :-) As I said, I was devastated.
Are you able to double check and send me some photos.
For a shipping address, I am at:
Doug Jackson
5 Pinschof Place,
Gordn, ACT, 2906
Australia
+61 414 986878
Kindest regards,
Doug Jackson
em: doug(a)doughq.com
ph: 0414 986878
Follow my amateur radio adventures at vk1zdj.net
14 Jan
14 Jan
5:54 a.m.
Doug,
it did indeed drop into Spam. Let me take some pics first.
Dave
On 14/01/2025 12:26, Doug Jackson via cctalk wrote:
Hi Dave,
I'll send this to the group, I suspect my email made it into your spam.
Doug
---------- Forwarded message ---------
From: Doug Jackson <doug(a)doughq.com>
Date: Tue, 14 Jan 2025, 6:05 am
Subject: Re: SBC6128
To: <dave.g4ugm(a)gmail.com>
Hi Dave,
I was just researching the IOB6120 (I had an 8 at the end of the model..
sigh - memory is often faulty)
WOW - I had no idea that existed. I also had no idea that the
community picked up Bob's designs and ran with them so enthusiastically - I
feel like I have been under a rock for quite a while.
I would be very very happy to purchase your board + IOB that you have put
together - If the enclosure is not ideal, I am very happy to update that -
these little boards are awesome.
Just let me know a Paypal address and shipping details.
Kindest regards,
Doug Jackson
em: doug(a)doughq.com
ph: 0414 986878
Follow my amateur radio adventures at vk1zdj.net
On Tue, 14 Jan 2025 at 05:37, Doug Jackson <doug(a)doughq.com> wrote:
> Hi Dave,
>
> Thanks so much for that.
>
> Yes, postage is a pain, but necessary.
>
> If you are not using it, then the partially built one makes sense
> (assuming you can find the programable logic and CPU).
>
> Failing that, then I don't mind paying the 250 Pounds for the built board
> as long as it's complete :-) As I said, I was devastated.
>
> Are you able to double check and send me some photos.
>
> For a shipping address, I am at:
>
> Doug Jackson
> 5 Pinschof Place,
> Gordn, ACT, 2906
> Australia
> +61 414 986878
>
> Kindest regards,
>
> Doug Jackson
>
> em: doug(a)doughq.com
> ph: 0414 986878
>
> Follow my amateur radio adventures at vk1zdj.net
>
>
12:32 p.m.
Doug,
Well I fished out the SBC + IOB and tested it. It actually boots from
both IDE disk and CF card.
I made a few pictures and video and stuck them on my one drive...
https://1drv.ms/f/s!Ag4BJfE5B3onoNli9TZ4C4GMmhTJbg?e=wUThV9
I need to dig a little deeper for the board and bits, but I only have a
CPU board, not an IOB...
Dave
On 14/01/2025 12:26, Doug Jackson via cctalk wrote:
Hi Dave,
I'll send this to the group, I suspect my email made it into your spam.
Doug
---------- Forwarded message ---------
From: Doug Jackson <doug(a)doughq.com>
Date: Tue, 14 Jan 2025, 6:05 am
Subject: Re: SBC6128
To: <dave.g4ugm(a)gmail.com>
Hi Dave,
I was just researching the IOB6120 (I had an 8 at the end of the model..
sigh - memory is often faulty)
WOW - I had no idea that existed. I also had no idea that the
community picked up Bob's designs and ran with them so enthusiastically - I
feel like I have been under a rock for quite a while.
I would be very very happy to purchase your board + IOB that you have put
together - If the enclosure is not ideal, I am very happy to update that -
these little boards are awesome.
Just let me know a Paypal address and shipping details.
Kindest regards,
Doug Jackson
em: doug(a)doughq.com
ph: 0414 986878
Follow my amateur radio adventures at vk1zdj.net
On Tue, 14 Jan 2025 at 05:37, Doug Jackson <doug(a)doughq.com> wrote:
> Hi Dave,
>
> Thanks so much for that.
>
> Yes, postage is a pain, but necessary.
>
> If you are not using it, then the partially built one makes sense
> (assuming you can find the programable logic and CPU).
>
> Failing that, then I don't mind paying the 250 Pounds for the built board
> as long as it's complete :-) As I said, I was devastated.
>
> Are you able to double check and send me some photos.
>
> For a shipping address, I am at:
>
> Doug Jackson
> 5 Pinschof Place,
> Gordn, ACT, 2906
> Australia
> +61 414 986878
>
> Kindest regards,
>
> Doug Jackson
>
> em: doug(a)doughq.com
> ph: 0414 986878
>
> Follow my amateur radio adventures at vk1zdj.net
>
>
2:13 p.m.
Hi Dave,
That's exactly what I remembered - *infinite* storage across many volumes
:-)
That enclosure looks practical as well. - Whats the PSU? Fortunately the
UK and Aus have the same power 230V (ish).
Given the level of completeness, I would be very happy to provide the
completed unit a new home if you are happy to send it.
If you do find the other board and bits, I would have a think about them -
Maybe somebody here in Oz would be interested - I will ask around - I dont
think I *need* a PDP8 cluster ;-) Maybe thats also a conversation for the
Minister of Parks and Recreation here :-)
I love that the IOB is surface mount - It has caused my brain to start
thinking about simplifying some of my STD bus based boards to be SM - So
much cleaner.
I can do payment via Paypal if thats ok? Just let me know what you would
like..
Kindest regards,
Doug Jackson
em: doug(a)doughq.com
ph: 0414 986878
Follow my amateur radio adventures at vk1zdj.net
On Wed, 15 Jan 2025 at 07:32, David Wade via cctalk <cctalk(a)classiccmp.org>
wrote:
Doug,
Well I fished out the SBC + IOB and tested it. It actually boots from
both IDE disk and CF card.
I made a few pictures and video and stuck them on my one drive...
https://1drv.ms/f/s!Ag4BJfE5B3onoNli9TZ4C4GMmhTJbg?e=wUThV9
I need to dig a little deeper for the board and bits, but I only have a
CPU board, not an IOB...
Dave
On 14/01/2025 12:26, Doug Jackson via cctalk wrote:
Hi Dave,
I'll send this to the group, I suspect my email made it into your spam.
Doug
---------- Forwarded message ---------
From: Doug Jackson <doug(a)doughq.com>
Date: Tue, 14 Jan 2025, 6:05 am
Subject: Re: SBC6128
To: <dave.g4ugm(a)gmail.com>
Hi Dave,
I was just researching the IOB6120 (I had an 8 at the end of the model..
sigh - memory is often faulty)
WOW - I had no idea that existed. I also had no idea that the
community picked up Bob's designs and ran with them so enthusiastically
- I
feel like I have been under a rock for quite a
while.
I would be very very happy to purchase your board + IOB that you have put
together - If the enclosure is not ideal, I am very happy to update that
-
these little boards are awesome.
Just let me know a Paypal address and shipping details.
Kindest regards,
Doug Jackson
em: doug(a)doughq.com
ph: 0414 986878
Follow my amateur radio adventures at vk1zdj.net
On Tue, 14 Jan 2025 at 05:37, Doug Jackson <doug(a)doughq.com> wrote:
> Hi Dave,
>
> Thanks so much for that.
>
> Yes, postage is a pain, but necessary.
>
> If you are not using it, then the partially built one makes sense
> (assuming you can find the programable logic and CPU).
>
> Failing that, then I don't mind paying the 250 Pounds for the built
board
> as long as it's complete :-) As I said,
I was devastated.
>
> Are you able to double check and send me some photos.
>
> For a shipping address, I am at:
>
> Doug Jackson
> 5 Pinschof Place,
> Gordn, ACT, 2906
> Australia
> +61 414 986878
>
> Kindest regards,
>
> Doug Jackson
>
> em: doug(a)doughq.com
> ph: 0414 986878
>
> Follow my amateur radio adventures at vk1zdj.net
>
>
15 Jan
15 Jan
2:02 p.m.
On 14/01/2025 22:13, Doug Jackson wrote:
Hi Dave,
That's exactly what I remembered - *infinite* storage across many
volumes :-)
That enclosure looks practical as well. - Whats the PSU? Fortunately
the UK and Aus have the same power 230V (ish).
Given the level of completeness, I would be very happy to provide the
completed unit a new home if you are happy to send it.
If you do find the other board and bits, I would have a think about
them - Maybe somebody here in Oz would be interested - I will ask
around - I dont think I *need* a PDP8 cluster ;-) Maybe thats also a
conversation for the Minister of Parks and Recreation here :-)
OK so I have found the bits I have which are:-
2 x SBC6120 PCBs RBC Edition R 1.10 08-Oct-2016
2 x Custom Chips - BTS6120 High, BTS6120 Low, IOT 1, IOT 2, MEM
2 X HD1-6120-9
6 X HD1-6402-9
What I don't have is any 82C55A, AS6C1008 or the other bits needed to
complete a unit. (actually I might have some power connectors)
Assuming Doug is taking the working unit, If others in Australia want
any bits I can ship them to Doug.
I think £50 is a reasonable price for 1 off - PCB, Custom Chips, 6120
and 6402.
Spare 6402s available for postage.
Dave
2:25 p.m.
New subject: Fwd: Fwd: SBC6128
More pics of other bits added to my one drive
Dave
(Sorry if this is a bit of a mess. Some messages got lost in my spam
folder)
-------- Forwarded Message --------
Subject: Re: [cctalk] Fwd: SBC6128
Date: Tue, 14 Jan 2025 20:32:33 +0000
From: David Wade <dave.g4ugm(a)gmail.com>
To: Doug Jackson via cctalk <cctalk(a)classiccmp.org>
Doug,
Well I fished out the SBC + IOB and tested it. It actually boots from
both IDE disk and CF card.
I made a few pictures and video and stuck them on my one drive...
https://1drv.ms/f/s!Ag4BJfE5B3onoNli9TZ4C4GMmhTJbg?e=wUThV9
I need to dig a little deeper for the board and bits, but I only have a
CPU board, not an IOB...
Dave
On 14/01/2025 12:26, Doug Jackson via cctalk wrote:
Hi Dave,
I'll send this to the group, I suspect my email made it into your spam.
Doug
---------- Forwarded message ---------
From: Doug Jackson <doug(a)doughq.com>
Date: Tue, 14 Jan 2025, 6:05 am
Subject: Re: SBC6128
To: <dave.g4ugm(a)gmail.com>
Hi Dave,
I was just researching the IOB6120 (I had an 8 at the end of the model..
sigh - memory is often faulty)
WOW - I had no idea that existed. I also had no idea that the
community picked up Bob's designs and ran with them so
enthusiastically - I
feel like I have been under a rock for quite a while.
I would be very very happy to purchase your board + IOB that you have put
together - If the enclosure is not ideal, I am very happy to update that -
these little boards are awesome.
Just let me know a Paypal address and shipping details.
Kindest regards,
Doug Jackson
em: doug(a)doughq.com
ph: 0414 986878
Follow my amateur radio adventures at vk1zdj.net
On Tue, 14 Jan 2025 at 05:37, Doug Jackson <doug(a)doughq.com> wrote:
> Hi Dave,
>
> Thanks so much for that.
>
> Yes, postage is a pain, but necessary.
>
> If you are not using it, then the partially built one makes sense
> (assuming you can find the programable logic and CPU).
>
> Failing that, then I don't mind paying the 250 Pounds for the built board
> as long as it's complete :-) As I said, I was devastated.
>
> Are you able to double check and send me some photos.
>
> For a shipping address, I am at:
>
> Doug Jackson
> 5 Pinschof Place,
> Gordn, ACT, 2906
> Australia
> +61 414 986878
>
> Kindest regards,
>
> Doug Jackson
>
> em: doug(a)doughq.com
> ph: 0414 986878
>
> Follow my amateur radio adventures at vk1zdj.net
>
>
17 Jan
17 Jan
6:40 a.m.
Hi Doug,
Chris Tersteeg over at Vcfed designed a very nice front panel (FP6120
replacement) and also a 3D printed case for the SBC6120.
Check out the following thread:
https://forum.vcfed.org/index.php?threads/sbc6120-mini-front-panel.1245272/
All the design files including build instructions, Gerbers, BOM and STL
files are available from GIThub:
https://github.com/djtersteegc/sbc6120-mini-front-panel
If you have no SBC6120 CPU board you can build a new one using a PCB
redesign from Retrobrew:
https://www.retrobrewcomputers.org/doku.php?id=boards:sbc:sbc6120-rbc-editi…
Gerbers, BOM, software and build instructions for the SBC6120 CPU board are
available from the link above (see the "File List" at the bottom of the
Retrobrew page).
Enjoy
Tom
On Tue, Jan 14, 2025 at 8:37 PM Doug Jackson via cctalk <
cctalk(a)classiccmp.org> wrote:
Hi Dave,
I'll send this to the group, I suspect my email made it into your spam.
Doug
---------- Forwarded message ---------
From: Doug Jackson <doug(a)doughq.com>
Date: Tue, 14 Jan 2025, 6:05 am
Subject: Re: SBC6128
To: <dave.g4ugm(a)gmail.com>
Hi Dave,
I was just researching the IOB6120 (I had an 8 at the end of the model..
sigh - memory is often faulty)
WOW - I had no idea that existed. I also had no idea that the
community picked up Bob's designs and ran with them so enthusiastically - I
feel like I have been under a rock for quite a while.
I would be very very happy to purchase your board + IOB that you have put
together - If the enclosure is not ideal, I am very happy to update that -
these little boards are awesome.
Just let me know a Paypal address and shipping details.
Kindest regards,
Doug Jackson
em: doug(a)doughq.com
ph: 0414 986878
Follow my amateur radio adventures at vk1zdj.net
On Tue, 14 Jan 2025 at 05:37, Doug Jackson <doug(a)doughq.com> wrote:
Hi Dave,
Thanks so much for that.
Yes, postage is a pain, but necessary.
If you are not using it, then the partially built one makes sense
(assuming you can find the programable logic and CPU).
Failing that, then I don't mind paying the 250 Pounds for the built board
as long as it's complete :-) As I said, I was devastated.
Are you able to double check and send me some photos.
For a shipping address, I am at:
Doug Jackson
5 Pinschof Place,
Gordn, ACT, 2906
Australia
+61 414 986878
Kindest regards,
Doug Jackson
em: doug(a)doughq.com
ph: 0414 986878
Follow my amateur radio adventures at vk1zdj.net
17
days inactive
20
days old
6 comments
3 participants
participants (3)
-
David Wade -
Doug Jackson -
Tom Hunter