Over the weekend I picked up a Pro/350 from the System Source swap. The good news is I traded something of similar size for it, and more importantly I didn't bring anything else home :-) Anyway, it's a pretty basic system with 10mb ST412 drive, 128k memory on board, 256kb memory expansion, disk controller, floppy controller and RX50 (with the usual loose pad, glued back in), and a video card WITHOUT the extended bitmap option. Brought it home, pulled everything, checked the power supply (good), got the drive spinning, and since drives like this tend to be precious I sucked the data off it using a Gesswin emulator (best money I have spent). Sucked the data off with no errors, thus everything is preserved for eternity. I'll take a look at the drive and see about using a bit of watch oil on the shaft to lubricate the bearings and put this disk back into a "usable" category. Even better: Fired up and compiled xhomer on my Raspberry Pi CM3+, loaded the image, and sure enough: There is a POS 2.0 install on the disk, with a really neat app called "Prostar/300" Seems to be an office tool for real estate office, specifically farm management, investment, and amortization. Even better it looks like all the data was stored on Floppies (now long gone) so no PII issues. And there is a word processor built into the app along with the normal PROSE editor. I'll tool around with it for a bit, then put the disk image up on crystel.com. An interesting application, can be easily transferred to a real disk using a gesswin emulator or put it on xhomer. :-) Pretty nice application from 1986 vintage, I can see this being used in offices around the midwest. Chris